Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Allen-Bradley W201K5CF Non-reversing Contactor Type operates with 200V and 75 Hp max.. It also has 270 Continuous Amps and a 120/60 Coil Voltage (Hz/V).
The W201K5CF contactor is a non-reversing contactor manufactured by Eaton Cutler-Hammer. The W201K5CF contactor features a voltage rating of 200 Volts AC and it also features a Horsepower rating of 75 Horsepower maximum. The W201K5CF contactor comes with a coil voltage rating of 120 Hertz per 60 Volts. The 3-pole contactor features a continuous current of 270 Amps, while the shipping dimensions are 7.07 by 10.08 by 7.64 inches. The W201K5CF contactor weighs 30 pounds. The W201K5CF contactor features a NEMA size of 5 and it is suitable for use with the Advantage series motor control systems. The motor rated contractors do not include the phase imbalance feature, the phase loss feature, or the solid-state current-sensing unit that provides overload protection.
The W201K5CF contactor features a coil controller that prevents the “contact kiss” position whenever the unit is on pickup and dropout when the coil voltage supply drops drastically. The W201K5CF contactor’s coil and coil controller prevents coil energization when the control voltage is low or dips down from a higher level. This non-reversing contactor is mostly used for switching motor loads in applications where running the overcurrent protection feature is not appropriate or when it is provided separately. Only trained technicians should be allowed to install, operate, or maintain the W201K5CF contactor. The installers should be aware of the proper procedures that are required for disconnecting and locking off the power to the motor control center. The W201K5CF contactor may be used with the 2-wire control or even the 3-wire control schemes. The contactor is suitable for use on the circuits that are capable of delivering no more than the current value that is indicated on the unit.
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Part Number | W201K5CF |
| Product Type | Contactor |
| Contactor Type | Non-reversing |
| Voltage | 200V AC |
| Hp max. | 75 |
| Continuous Amps | 270 |
| Coil Voltage (Hz/V) | 120/60 |
| NEMA Size | 5 |
| Dimensions (W/H/D) | 7.07 x 10.08 x 7.64 in. |
| Weight | 30 lbs |
| Poles | 3 |
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Part Number | W201K5CF |
| Product Type | Contactor |
| Contactor Type | Non-reversing |
| Voltage | 200V AC |
| Hp max. | 75 |
| Continuous Amps | 270 |
| Coil Voltage (Hz/V) | 120/60 |
| NEMA Size | 5 |
| Dimensions (W/H/D) | 7.07 x 10.08 x 7.64 in. |
| Weight | 30 lbs |
| Poles | 3 |