Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The W250MLCFC Cutler Hammer is a NEMA Contactor/Starter Eaton Drive. It belongs to the W200 series and has a motor voltage of 200 with a maximum hp of 1. Its enclosure must be size 1 and its coil voltage is around 120. With around 60 Hertz, this module is a 3-Phase unit with 3 poles.
The W250MLCFC is a Cutler Hammer NEMA Contactor or starter that belongs to the W200 series and features a motor voltage of 200 with a maximum horsepower of 1 HP. The W250MLCFC enclosure should be size 1 and it has a coil voltage of around 120 featuring about 60 Hertz. The W250MLCFC is a three-phase module with up to three poles. The W250MLCFC is a versatile solution used in various applications. It supports installation in logistics, conveyor controls, production machines, tooling machines, packaging machines, and small elevators. The W250MLCFC features the IEC and the UL short circuit ratings with about a 100 kAIC UL short circuit rating when mated with the 30A class J fuse. The W250MLCFC comes with an easy installation featuring push-in terminals for quick and easy wiring of the power and control circuits. These push-in terminals cut down around 60% of general installation time compared to screw-in terminals and provide better contact against vibrations.
The W250MLCFC should be installed by a qualified mechanic. During installation, the W250MLCFC power supply should be disconnected to make sure the device is not accidentally retriggered. The unit installer needs to verify the isolation from the power supply. Also, before installation, it is necessary the device be verified free of electrostatic charge. The connecting cables and the signal lines should also be installed so that the inductive or the capacitive interference will not impair the automation functionalities. The automation devices and the related operating elements should be installed so that they are protected against unintentional operation.
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |