W250M6CFC

Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.

Product comes with Urgent Automation's 1-year warranty.

Rated 4.6 with 6 reviews

Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


W250M6CFC

Description: The W250M6CFC Cutler Hammer is a NEMA Contactor/Starter Eaton Drive. It belongs to the W200 series and has a motor voltage of 200 with a maximum hp of 1. Its enclosure must be size 1 and its coil voltage is around 120. With around 60 Hertz, this module is a 3-Phase unit with 3 poles.

Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.

Product comes with Urgent Automation's 1-year warranty.


Description:

The W250M6CFC Cutler Hammer is a NEMA Contactor/Starter Eaton Drive. It belongs to the W200 series and has a motor voltage of 200 with a maximum hp of 1. Its enclosure must be size 1 and its coil voltage is around 120. With around 60 Hertz, this module is a 3-Phase unit with 3 poles.




Rated 4.6 with 6 reviews







About W250M6CFC

The W250M6CFC starter drive is an Eaton Cutler-Hammer drive produced as part of the Advantage/W200 product family that offers flexible and versatile solutions for a variety of applications. This product family offers NEMA rated starters and contactors with numerous features that are focused on protection from ground currents, phase losses, and unbalanced phases. These drives provide multifunctional overload protection that will eliminate the need for the purchase of additional parts in a system. A single W200 starter unit will replace multiple older components that have to be combined to provide all of the features that are included in 1 starter unit like the W250M6CFC. The Eaton Advantage starters set the standard for industrial motor control and they provide improved system protection with motor utilization. Also, these devices are packed in small frames, so they do not require much space. The standard features that are included with this unit are built-in communications features, long operating lives, pre-start diagnostics, current sensing, and intelligent coil controllers.

The W250M6CFC starter drive is built with a size 6 frame and it has 3 poles like other similar devices from the vertical reversing drive category. The starter requires a motor voltage of 200 Volts AC and it has a power output of 150 Horsepower maximum. The coil voltage of the starter is 120 Volts and its input frequency is 60 Hertz. In addition to that, the continuous amperage of the enclosed unit is 540 Amps. Also, it should be mentioned that the users will not need additional heaters for this starter and the unit comes wired for separate control processes. The W250M6CFC starter unit has dimensions that include a height of 256 millimeters (10.08 inches), a width of 179.6 millimeters (7.07 inches), and a depth of 194.1 millimeters (7.64 inches). The ambient operating temperature range for the W250M6CFC starter unit ranges from -40 to 40 degrees Celsius (-40 to 104 degrees Fahrenheit) and the storage range is between -40 and 100 degrees Celsius (-40 and 212 degrees Fahrenheit).


Technical specifications:


ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Common misspellings:
  • W25oM6CFC