Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The W250M4CFC Cutler Hammer is a NEMA Contactor/Starter Eaton Drive. It belongs to the W200 series and has a motor voltage of 200 with a maximum hp of 1. Its enclosure must be size 1 and its coil voltage is around 120. With around 60 Hertz, this module is a 3-Phase unit with 3 poles.
The W250M4CFC is one of the available motor starter drives from the W200 (Advantage) product series by Eaton Cutler-Hammer. The drives in this product series are designed with an impressive set of features that are necessary for keeping the users’ equipment undamaged and safe. The many protective features that these units have distinguish them from other similar devices on the market. The cost-effective W200 devices offer new and improved sensing and monitoring technology, special contact closure systems that use balanced energy, increased operating life thanks to protective features that prevent rapid electrical and mechanical wear, an advanced coil controller that optimizes the process of contact closing in any control circuit situation, and other features that improve the operation of the overall system. The W200 product family offers NEMA rated starters that set the standard when it comes to innovative devices that differ from conventional motor starters. These starters are available as non-reversing, horizontal reversing, and vertical reversing types of starters.
The W250M4CFC starter has an input motor voltage of 200 Volts AC and it is categorized as a 3-pole unit. The unit has a frame size of 4 and its maximum power output is 40 Horsepower. The coil voltage of this starter drive is 120 Volts and its input frequency is 60 Hertz. The continuous current for an enclosed W250M4CFC starter is 135 Amps. The vertical reversing unit does not need heaters and it is wired for separate control processes. This starter unit will provide protection from ground currents, phase unbalance, and phase loss situations thanks to the integrated protective features that are factory-included. The W250M4CFC Advantage starter has the following dimensions (H x W x D): 203.2 millimeters (8 inches) x 93.5 millimeters (3.68 inches) x 166.1 millimeters (6.54 inches). This starter drive operates within a temperature range of -40 to 40 degrees Celsius (-40 to 104 degrees Fahrenheit). In addition to that, the best storage temperature range for the starter unit is -40 to 100 degrees Celsius (-40 to 212 degrees Fahrenheit) according to Eaton Cutler-Hammer’s specifications.
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |