Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The W210MLCFC Cutler Hammer is a NEMA Contactor/Starter Eaton Drive. It belongs to the W200 series and has a motor voltage of 200 with a maximum hp of 1. Its enclosure must be size 1 and its coil voltage is around 120. With around 60 Hertz, this module is a 3-Phase unit with 3 poles.
The W210MLCFC is a horizontal and reversing motor controller that has been included in the NEMA Advantage series. This drive has been manufactured by the Eaton Corporation. The Eaton-Corporation W210MLCFC horizontal and reversing motor controller operates with a coil voltage of 120 Volts AC, but it can operate at up to its 110% of this rating without causing further damage to the coils. It also operates at an amperage rating of 27 Amps and it can reach a Horsepower rating of 1 or 2 Horsepower. The Eaton Corporation W210MLCFC horizontal and reversing motor controller has the ability to control motor speed and torque and at the same time, it enables soft starting and stopping functions. These characteristics help the motor to have smooth operations instead of operating with sudden speed changes that can cause damage
The Eaton Corporation W210MLCFC’s horizontal and reversing motor controller design features an open enclosure that is intended for indoor use only. With this enclosure, the controller should not be exposed to corrosive material that could damage the whole structure and its internal parts. This controller can withstand a maximum temperature rating of 40 degrees Celsius and it can operate at an altitude of 2000 meters without derating. The Eaton Corporation W210MLCFC horizontal and reversing motor controller requires an area of 16.25 square inches and it has a shipping weight of 2 pounds. This controller has a width of 2.50 inches, a height of 6.50 inches, and a length of 4.96 inches. The Eaton Corporation W210MLCFC horizontal and reversing motor controller can be used with a DeviceNet module that enables the controller to transfer data between different pieces of equipment. Through this module, the controller can be included in the network.
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |