Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The W210M1CFC Cutler Hammer is a NEMA Contactor/Starter Eaton Drive. It belongs to the W200 series and has a motor voltage of 200 with a maximum hp of 1. Its enclosure must be size 1 and its coil voltage is around 120. With around 60 Hertz, this module is a 3-Phase unit with 3 poles.
The Cutler-Hammer W210M1CFC is a 3-pole reversive controller that operates in applications that include squirrel-cage motors and induction motors. This controller has been designed to operate with a coil voltage of 120 Volts and a frequency of 60 Hertz. This voltage can be exceeded by up to 10% without causing damage to the coils. The maximum current rating this controller can reach is 27 Amps and it can also reach a Horsepower rating of 7.5 to 10 Horsepower. This controller has been designed by Cutler-Hammer (a division of the Eaton Corporation) The Cutler-Hammer W210M1CFC 3-pole reversive controller main function is to control the motor starting and stopping processes and at the same time, it provides overload protection with an accuracy of 2% and phase loss and imbalance protection. It also provides ground current protection. This controller works with a motor flange rating of 3.15 to 27.
The Cutler-Hammer W210M1CFC 3-pole reversive controller has a selectable automatic or manual reset process, a selectable trip class, and a selectable trip current. It also comes with an open enclosure that provides protection to both the wiring of the controller and the users surrounding the controller. This controller has a horizontal orientation and it occupies an area of 16.25 square inches. It is recommended to install the Cutler-Hammer W210M1CFC 3-pole reversive controller in a clean environment without the presence of liquids and corrosive materials. It can withstand a maximum temperature rating of 40 degrees Celsius. The Cutler-Hammer W210M1CFC 3-pole reversive controller comes with communications capabilities and it provides brownout protection and minimized bounce times when operating. It can provide smooth operations that will protect the motor that is used with it.
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |