Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The W200M3CFC Cutler Hammer is a NEMA Contactor/Starter Eaton Drive. It belongs to the W200 series and has a motor voltage of 200 with a maximum hp of 1. Its enclosure must be size 1 and its coil voltage is around 120. With around 60 Hertz, this module is a 3-Phase unit with 3 poles.
The Eaton W200M3CFC starter is a non-reversing starter that is part of the Eaton Advantage Series. This series is manufactured by Cutler-Hammer, a division of the Eaton Corporation. The Eaton Cutler-Hammer W200M3CFC non-reversing starter plays an important role in several industries when it is used with motors that require a non-reversing action from the controller. It is also used with 3-phase motors that voltage ranges from 200 to 575 Volts. The Eaton Cutler-Hammer W200M3CFC non-reversing starter comes with a voltage rating of 120 Volts and a frequency rating of 60 Hertz. This controller operates at a continuous current rating of 90 Amps and a Horsepower rating of 25 to 50 Horsepower.
The Eaton Cutler-Hammer W200M3CFC non-reversing starter has an open enclosure that protects the essential wiring of the controller and at the same time enables the controller to withstand a higher temperature range than other controllers. This controller should not come into contact with liquids and it should not be installed in extremely corrosive environments that could affect both the functioning of the motor and the controller by causing wear to both external parts. The Eaton Cutler-Hammer W200M3CFC non-reversing starter has a height of 8 inches, a width of 3.68 inches, and a depth of 6.54 inches. It also has an approximate shipping weight of 6 pounds. The Eaton Cutler-Hammer W200M3CFC non-reversing starter can withstand a maximum temperature of 40 degrees Celsius while it is operating and it can operate at a maximum altitude of 6600 feet. If it is used at a higher altitude, it might be necessary for the controller to be derated.
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |