Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The W200M2CNC Cutler Hammer is a NEMA Contactor/Starter Eaton Drive. It belongs to the W200 series and has a motor voltage of 230 with a maximum hp of 1. Its enclosure must be size 1 and its coil voltage is around 110. With around 50 Hertz, this module is a 3-Phase unit with 3 poles.
The Eaton W200M2CNC is a NEMA starter that belongs to the Advantage series. This starter has been manufactured and designed by the Eaton Corporation and it is part of Eaton’s Cutler-Hammer product line. The Eaton Cutler-Hammer W200M2CNC NEMA starter is a NEMA size 2 starter and it has a coil voltage of 110 Volts and a frequency of 50 Hertz. This drive is able to operate with 3-phase motors within voltage ratings of 200, 230, 460, and 575 Volts. The Eaton Cutler-Hammer W200M2CNC NEMA starter has a continuous ampere rating of 45 Amps and a Horsepower rating of 10 to 25 Horsepower. The Eaton Cutler-Hammer W200M2CNC NEMA starter provides overload protection with an accuracy rating of 2% and a phase loss and imbalance protection. When operating this starter, heaters are not required. It provides the users with a small physical size for easy installation and it is capable of being connected through compatible communication protocols such as DeviceNet technology.
The Eaton Cutler-Hammer W200M2CNC NEMA starter contains 5 status indicators that show whether the controller is off, running (FAST), tripped, or in the alarm mode. The alarm mode is activated when there is a problem or condition in the drive or machine system that must be taken care of immediately to maintain smooth operations. It also provides push buttons that enable the users to have better control of the drive. In order to enhance the functions of the Eaton Cutler-Hammer W200M2CNC NEMA starter, it is recommended to have it attached to the Eaton Cutler-Hammer Advantage Central Monitoring Unit. This unit enables the controller to send and receive data.
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |