Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The SVX050A1-5A4N1 is an adjustable frequency drive manufactured by Eaton Cutler-Hammer. The Cutler-Hammer SVX050A1-5A4N1 Adjustable Frequency Drive is part of the SVX9000 Series of adjustable frequency drives. The Cutler-Hammer SVX050A1-5A4N1 Adjustable Frequency Drive feature ratings of 50 Horsepower, 575 Volts AC, 52 Amps, 320 Hertz maximum frequency, 3 input phases, dynamic brakes, sensorless vector control, 8 inputs, and 4 outputs. The Cutler-Hammer SVX050A1-5A4N1 Adjustable Frequency Drive is contained in a NEMA IP21 Enclosure. The users should mount the Cutler-Hammer SVX050A1-5A4N1 Adjustable Frequency Drive on a flame-resistant mounting surface like a steel plate to minimize fire potential. The Cutler-Hammer SVX050A1-5A4N1 Adjustable Frequency Drive should be mounted on a perpendicular surface which is capable of supporting the weight of the drive and is not subjected to vibration. To reduce the risk of the Cutler-Hammer SVX050A1-5A4N1 Adjustable Frequency Drive falling and being damaged. The Cutler-Hammer SVX050A1-5A4N1 Adjustable Frequency Drive should be protected from fire and arcing by preventing foreign substances such as metal shavings and clippings from entering the drive’s enclosure.
A well-ventilated room is an ideal place for the Cutler-Hammer SVX050A1-5A4N1 Adjustable Frequency Drive installation, and so is a room which is not subjected to extreme temperatures, high humidity levels, and direct sunlight. The users should ensure that no power correction capacitors are connected to the Cutler-Hammer SVX050A1-5A4N1 Adjustable Frequency Drive output in order to prevent the drive from malfunctioning and to prevent potential damage. When the conduit is used in the Cutler-Hammer SVX050A1-5A4N1 Adjustable Frequency Drive wiring, then the users should utilize separate conduits for the signal wiring, the input power wiring, the control wiring, and the output power wiring. When wiring the Cutler-Hammer SVX050A1-5A4N1 Adjustable Frequency Drive while using shielded cables, connect the shields of the input line power cable and the drive motor cable to the ground terminals of the Cutler-Hammer SVX050A1-5A4N1 Adjustable Frequency Drive.
Manufacturer | Eaton Cutler-Hammer |
Brand | Eaton Cutler-Hammer |
Part Number/Catalog No. | SVX050A1-5A4N1 |
Product Type | Adjustable Frequency Drive |
Product Family | Open Drives |
Horsepower | 50 Horsepower |
AFD Software Series | Standard |
Enclosure | NEMA Type 1 |
Voltage | 575 Volts AC |
Kepyad Type | Alphanumeric |
Input Option | 3-phase, EMC L |
Brake Chopper Option | No Brake Chopper Circuit |
Board Modifications | Standard Boards |
Frame Size | FR8 |
Supply Frequency | 50 to 60 Hertz |
Inputs | 2 Analog, 6 Digital |
Outputs | 1 Analog, 1 Digital, 2 Relay |
Manufacturer | Eaton Cutler-Hammer |
Brand | Eaton Cutler-Hammer |
Part Number/Catalog No. | SVX050A1-5A4N1 |
Product Type | Adjustable Frequency Drive |
Product Family | Open Drives |
Horsepower | 50 Horsepower |
AFD Software Series | Standard |
Enclosure | NEMA Type 1 |
Voltage | 575 Volts AC |
Kepyad Type | Alphanumeric |
Input Option | 3-phase, EMC L |
Brake Chopper Option | No Brake Chopper Circuit |
Board Modifications | Standard Boards |
Frame Size | FR8 |
Supply Frequency | 50 to 60 Hertz |
Inputs | 2 Analog, 6 Digital |
Outputs | 1 Analog, 1 Digital, 2 Relay |