Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Eaton Cutler-Hammer SVX040A1-4A1N1 Adjustable Frequency Drive has 40 hp, a 480V Voltage , and a FR7 Frame Size. It also contains 8 Inputs and 4 Outputs.
The SVX040A1-4A1N1 is an Adjustable Frequency AC drive manufactured by the Cutler-Hammer division of Eaton Corporation. This is a 40 Horsepower AC drive that belongs to 9000X AF drive family and it is designed to work with 3-phase motors exclusively, rated for a 380 to 500 Volt AC voltage and up to 61 Amperes. The output frequency of this module can be programmed for up to 320 Hertz. Power, motor, DC, and break terminals are all provided on the SVX040A1-4A1N1 adjustable frequency AC drive and it has integrated two basic boards (A2 and A9; the A9 board has two analog inputs at 0 to 10 Volt DC or 4 to 20 mA, 6 digital inputs at 24 Volts DC, one analog output at 0 to 10 Volts DC or 4 to 20 mA, and 1 digital output that is an open collector with a maximum current of 50 mA. This board has 4 jumper blocks (X1, X2, X3, and X6) for analog inputs, outputs, and grounding settings while the A2 board has two relays, a NO/NC selectable with 24 Volt DC/8A, 250 Volt AC/8A, and 125 Volt DC/0.4A switching capacities. The HMI (Human Machine Interface) on this drive has an LCD display with an alphanumeric keypad; there are run, remote, and fault LED status indicators on this HMI and the LCD display also shows indicators for run, stop, ready, alarm, fault, direction, I/O terminal control, keypad control, and bus control. This HMI features a Startup Wizard option that guides the operator through the basic setup for fast commissioning at the module’s power up. This device is packed in a NEMA 1(IP21) protected housing with dimensions of 190 x 630 x 257 millimeters (7.5 x 25.8 x 10.1 inches). The drive weighs approximately 35 kilograms (77.2 pounds) and its permitted ambient working temperature is between -10 and 50 degrees Celsius.
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Part Number/Catalog No. | SVX040A1-4A1N1 |
| Product Type | Adjustable Frequency Drive |
| Product Family | Open Drives |
| Horsepower | 40 |
| AFD Software Series | Standard |
| Enclosure | NEMA Type 1 |
| Voltage | 480V |
| Kepyad Type | Alphanumeric |
| Input Option | 3-phase, EMC H |
| Brake Chopper Option | No Brake Chopper Circuit |
| Board Modifications | Standard Boards |
| Frame Size | FR7 |
| Supply Frequency | 50/60 Hz |
| Inputs | 2 Analog, 6 Digital |
| Outputs | 1 Analog, 1 Digital, 2 Relay |
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Part Number/Catalog No. | SVX040A1-4A1N1 |
| Product Type | Adjustable Frequency Drive |
| Product Family | Open Drives |
| Horsepower | 40 |
| AFD Software Series | Standard |
| Enclosure | NEMA Type 1 |
| Voltage | 480V |
| Kepyad Type | Alphanumeric |
| Input Option | 3-phase, EMC H |
| Brake Chopper Option | No Brake Chopper Circuit |
| Board Modifications | Standard Boards |
| Frame Size | FR7 |
| Supply Frequency | 50/60 Hz |
| Inputs | 2 Analog, 6 Digital |
| Outputs | 1 Analog, 1 Digital, 2 Relay |