Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The SVX040A1-2A1N1 is an SVX9000 family variable speed drive designed and manufactured by the Eaton Corporation. The drive is shipped with a preset frequency that is proportionate to the line input and frequency. However, its adjustable frequency nature provides a way to introduce a user-adjusted frequency which is above the line frequency. Note that while it is adjustable, a higher frequency can damage the driven motor. Therefore, before adjusting the frequency, the controlled devices should be evaluated to ascertain that they can handle a higher frequency. The SVX040A1-2A1N1 can be used to control motors with a Horsepower rating of 40 Horsepower. The drive is operated at a voltage of 230 Volts AC from a 3-phase power source. The SVX030A1-2A1N1, as with other adjustable frequency drives in the same family, can accommodate and control more than 1 motor provided they are connected in parallel.
The SVX040A1-2A1N1 has no brakes. Along with a display, the drive contains a keypad (alphanumeric) for adjusting the parameters and navigating through the settings. Note that the intermittent operating current of the motor should not be used for more than the intermittent operating current of the drive. The SVX040A1-2A1N1 is rated to be operated in an environment that has a relative humidity of between 5 and 95% without condensation. Additionally, the environment should be free from dripping water and without corrosive substances. At its maximum load capacity, the SVX040A1-2A1N1 has a rated altitude of 3300 feet without derating. Exceeding this altitude causes 1% derating for every 330 feet above the maximum rated altitude up to a maximum of 10,000 feet. The SVX040A1-2A1N1 supports a Type FR7 frame.
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Part Number/Catalog No. | SVX030A1-2A1N1 |
| Product Type | Adjustable Frequency Drive |
| Product Family | Open Drives |
| Horsepower | 30 Horsepower |
| AFD Software Series | Standard |
| Enclosure | NEMA Type 1 |
| Voltage | 230 Volts AC |
| Kepyad Type | Alphanumeric |
| Input Option | 3-phase, EMC H |
| Brake Chopper Option | No Brake Chopper Circuit |
| Board Modifications | Standard Boards |
| Frame Size | FR7 |
| Supply Frequency | 50 to 60 Hertz |
| Inputs | 2 Analog, 6 Digital |
| Outputs | 1 Analog, 1 Digital, 2 Relay |
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Part Number/Catalog No. | SVX030A1-2A1N1 |
| Product Type | Adjustable Frequency Drive |
| Product Family | Open Drives |
| Horsepower | 30 Horsepower |
| AFD Software Series | Standard |
| Enclosure | NEMA Type 1 |
| Voltage | 230 Volts AC |
| Kepyad Type | Alphanumeric |
| Input Option | 3-phase, EMC H |
| Brake Chopper Option | No Brake Chopper Circuit |
| Board Modifications | Standard Boards |
| Frame Size | FR7 |
| Supply Frequency | 50 to 60 Hertz |
| Inputs | 2 Analog, 6 Digital |
| Outputs | 1 Analog, 1 Digital, 2 Relay |