Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The SVX025A1-5A4N1 is an adjustable frequency drive manufactured by Eaton Cutler-Hammer. The Cutler-Hammer SVX025A1-5A4N1 Adjustable Frequency Drive is part of the SVX9000 Series of adjustable frequency drives. The Eaton Cutler-Hammer SVX025A1-5A4N1 Adjustable Frequency Drive features ratings of 25 Horsepower, 575 Volts AC, 3 input phases, 27 Amps (CT), dynamic braking, sensorless vector control, a keypad, 8 inputs, and 4 outputs. The Eaton Cutler-Hammer SVX025A1-5A4N1 Adjustable Frequency Drive is contained in a NEMA IP21 Enclosure. The Cutler-Hammer SVX025A1-5A4N1 Adjustable Frequency Drive automatically identifies motor settings for both the U/F mode and the sensorless vector mode while keeping the records of changes in the parameters configuration for a period of time. The control of the vector takes place in a unit of stator flux coordinates that is immune to relatively small measurement variations and motor configurations. The Cutler-Hammer SVX025A1-5A4N1 Adjustable Frequency Drive has a high capacitive leakage current when running that may cause the housing parts to exceed the ground potential.
The users should ensure that the front and cable covers are closed and fastened before supplying power to the Cutler-Hammer SVX025A1-5A4N1 Adjustable Frequency Drive to prevent potential electrical fault occurrence. Before opening the Eaton Cutler-Hammer SVX025A1-5A4N1 Adjustable Frequency Drive cover, the users should disconnect all power to the drive and wait for at least 5 minutes after all the keypad lights are off. This leaves sufficient time for the DC bus capacitor to discharge. Note that a voltage hazard may still exist in the DC bus capacitors even if the power has been switched off. Therefore, the users should verify that the capacitors have fully discharged by measuring the capacitor voltage by using a multimeter design for measuring the DC voltage. Disconnect the motor cable at the Cutler-Hammer SVX025A1-5A4N1 Adjustable Frequency Drive output terminals prior to any tests to prevent damaging the Cutler-Hammer SVX025A1-5A4N1 Adjustable Frequency Drive during cable or motor testing.
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Part Number/Catalog No. | SVX025A1-5A4N1 |
| Product Type | Adjustable Frequency Drive |
| Product Family | Open Drives |
| Horsepower | 25 Horsepower |
| AFD Software Series | Standard |
| Enclosure | NEMA Type 1 |
| Voltage | 575 Volts AC |
| Kepyad Type | Alphanumeric |
| Input Option | 3-phase, EMC L |
| Brake Chopper Option | No Brake Chopper Circuit |
| Board Modifications | Standard Boards |
| Frame Size | FR6 |
| Supply Frequency | 50 to 60 Hertz |
| Inputs | 2 Analog, 6 Digital |
| Outputs | 1 Analog, 1 Digital, 2 Relay |
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Part Number/Catalog No. | SVX025A1-5A4N1 |
| Product Type | Adjustable Frequency Drive |
| Product Family | Open Drives |
| Horsepower | 25 Horsepower |
| AFD Software Series | Standard |
| Enclosure | NEMA Type 1 |
| Voltage | 575 Volts AC |
| Kepyad Type | Alphanumeric |
| Input Option | 3-phase, EMC L |
| Brake Chopper Option | No Brake Chopper Circuit |
| Board Modifications | Standard Boards |
| Frame Size | FR6 |
| Supply Frequency | 50 to 60 Hertz |
| Inputs | 2 Analog, 6 Digital |
| Outputs | 1 Analog, 1 Digital, 2 Relay |