Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The RGH325033E is a three-pole RG frame series-G Molded Case Circuit Breaker manufactured by Eaton. Its performance at 480 Volts AC and 600 Volts AC are 65 kAIC and 50 kAIC respectively, and its maximum continuous Ampere rating is 2500 Amps. It is equipped with a 310+ Electronic LS trip unit and it features imperial threaded conductors at its line and load terminations. This breaker is suitable for reverse feed use and provides highly efficient overload and short circuit protection in three-phase systems for varied applications. A toggle type switch handle is used to operate the RGH325033E circuit breaker. Its trip performance can be tested regularly with a Digitrip 310 test kit and it can operate with multiple internal accessories (one accessory per pole) simultaneously to meet the specific needs of each application.
The RGH325033E circuit breaker is suitable for global applications. It can be used in panel boards, machine tool control, Busbar Trunking tap- off, individual circuit breaker enclosures, and it supports installation with a variety of field installable external accessories. A Cause of Trip display can be installed on the trip unit of the RGH325033E circuit breaker to provide important on-screen (LCD) information about low loads, phase current, and cause of trip while troubleshooting a fault. Alternatively, "Cause of Trip Light Emitting Diodes (LEDs) may be connected directly to the trip unit for the same purpose. Motor operator mechanisms can be used to achieve remote monitoring and operation for the RGH325033E circuit breaker while also providing local ON, OFF, and RESET operations and it features a push-to-trip button for manual tripping of the breaker.
| Part Number/Catalog No. | RGH325033E |
| Product Type | Molded Case Circuit Breaker |
| kAIC at 480 Volts AC | 65 |
| Amps | 2500 |
| Poles | 3 |
| Trip Unit | 310+ Electronic LS |
| Terminations | Imperial Tapped Line/Load Conductor |
| Max. Rated Current | 2500 A |
| Main Conducting Paths | 8 kV |
| Endurance | 3,000 Operating Cycles |
| Max. Switching Frequency | 60 1/hour |
| Rated Making Capacity | 20 A |
| Rated Operational Voltage | 125 to 250 Volts |
| Power Consumption at 24 Vac | 612 VA |
| Max. Opening Time | 62 milliseconds |
| Part Number/Catalog No. | RGH325033E |
| Product Type | Molded Case Circuit Breaker |
| kAIC at 480 Volts AC | 65 |
| Amps | 2500 |
| Poles | 3 |
| Trip Unit | 310+ Electronic LS |
| Terminations | Imperial Tapped Line/Load Conductor |
| Max. Rated Current | 2500 A |
| Main Conducting Paths | 8 kV |
| Endurance | 3,000 Operating Cycles |
| Max. Switching Frequency | 60 1/hour |
| Rated Making Capacity | 20 A |
| Rated Operational Voltage | 125 to 250 Volts |
| Power Consumption at 24 Vac | 612 VA |
| Max. Opening Time | 62 milliseconds |