Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Eaton RGH316032E is an 80% rated Series G circuit breaker with RG-frame. It supports reverse-feed applications. The 3-pole RGH316032E is rated for 1600 Amps. It has interrupt capacity ratings of 125 kAIC at 240 Volts AC and 65 kAIC at 480 Volts AC. The frequency rating for the RGH316032E is between 50 and 60 Hertz. This module is a complete breaker with an integrated Digitrip 310 RMS trip unit, also with an LSI option. Line and load terminals are provided with the breaker. The terminals are made from aluminum, and are either copper or aluminum wire (300 to 500 millimeters squared) is recommended for use with the breaker. Imperial type mounting hardware is required for installation.
To minimize the risk of injury or death for installation and damage to equipment, it is highly recommended to perform all installation and maintenance related activities for the RGH316032E with the circuit breaker in off state. All other electrical equipment should also be switched off and the working area should be clear of voltages. In addition, all relevant and generally accepted safety procedures should be followed. The RGH316032E is a UL certified breaker; available accessories include a gas barrier, DIN rail adapter, terminal shields, multi-wire connectors, edgewise extensions, and multiphase barriers. As per UL standard requirements, it is sealed at a factory after installation of internal accessories to prevent tampering with the calibration.
| Part Number/Catalog No. | RGH316032E |
| Product Type | Molded Case Circuit Breaker |
| kAIC @ 480VAC | 65 |
| Amps | 1600 |
| Poles | 3 |
| Trip Unit | 310+ Electronic LSI |
| Terminations | Imperial Tapped Line/Load Conductor |
| Max. Rated Current | 2500 A |
| Main Conducting Paths | 8 kV |
| Endurance | 3,000 Operating Cycles |
| Max. Switching Frequency | 60 1/h |
| Rated Making Capacity | 20 A |
| Rated Operational Voltage | 125/250 V |
| Power Consumption @ 24 Vac | 612 VA |
| Max. Opening Time | 62 ms |
| Part Number/Catalog No. | RGH316032E |
| Product Type | Molded Case Circuit Breaker |
| kAIC @ 480VAC | 65 |
| Amps | 1600 |
| Poles | 3 |
| Trip Unit | 310+ Electronic LSI |
| Terminations | Imperial Tapped Line/Load Conductor |
| Max. Rated Current | 2500 A |
| Main Conducting Paths | 8 kV |
| Endurance | 3,000 Operating Cycles |
| Max. Switching Frequency | 60 1/h |
| Rated Making Capacity | 20 A |
| Rated Operational Voltage | 125/250 V |
| Power Consumption @ 24 Vac | 612 VA |
| Max. Opening Time | 62 ms |