Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The JGE3200FAG is a Cutler-Hammer circuit breaker that is classified under the JG series of circuit breakers. The circuit breaker provides circuit protection for the branch circuit devices and it can be used for protecting the service entrance and feeder systems. The JGE3200FAG has the UL 489 device certification and it comes with the CSA 22.2 and the IEC standard EN60898/60947-2 certifications. The JGE3200FAG is categorized under the molded case subcategory and it comes as a 3-pole device. The JGE3200FAG carries a current rating of 200 Amps and it has a maximum voltage of 600 Volts AC. The module carries a kilo ampere interrupting capacity of 25 kAIC at 480 Volts AC, 65 kAIC at 240 Volts AC. and 18 kAIC at 600 Volts AC. The JGE3200FAG is provided with options for shunt trips, supplementary switches, undervoltage releases, and electronic trips. It is a device that is meant for offering branch circuit protection and so it is a heavy duty circuit breaker.
The JGE3200FAG comes with the line or load terminals included and the fixed thermal and adjustable magnetic trip units. The JGE3200FAG has the panel mounting option with no neutral pole and no neutral protection. The shipping dimensions for the JGE3200FAG are a height of 6.25 inches, a width of 5 inches, and a length of 9.25 inches. The gross weight for the JGE3200FAG is 6 pounds. The Cutler-Hammer JG frame circuit protection devices eliminate the need for separate overload relays, but they can be used with the contractor to eliminate the need for an overload relay creating a manual control for the motors. The JGE3200FAG meets the requirements for motor branch protection with its disconnecting ability and overload protection which are necessary requirements for overload protection. The JGE3200FAG also comes with the ability to offer phase imbalance protection, phase imbalance protection, and a high-load alarm, including an optional pre-detection trip relay.
| Part Number/Catalog No. | JGE3200FAG |
| Product Type | Molded Case Circuit Breaker |
| Frame | JG |
| kA @ 480V | 25 |
| Pole(s) | 3 |
| Amps | 200 |
| Trip Unit | Fixed Adjustment |
| Terminations | Line/Load Standard |
| Rating | 80% |
| Max. Rated Current | 250 A |
| Auxiliary Circuits | 690 VAC |
| Main Conducting Paths | 8 kV |
| Max. Switching Frequency | 240 1/h |
| Weight | 6 lbs |
| Dimensions (W x H x D) | 4.3 x 7 x 3.57 in. |
| Part Number/Catalog No. | JGE3200FAG |
| Product Type | Molded Case Circuit Breaker |
| Frame | JG |
| kA @ 480V | 25 |
| Pole(s) | 3 |
| Amps | 200 |
| Trip Unit | Fixed Adjustment |
| Terminations | Line/Load Standard |
| Rating | 80% |
| Max. Rated Current | 250 A |
| Auxiliary Circuits | 690 VAC |
| Main Conducting Paths | 8 kV |
| Max. Switching Frequency | 240 1/h |
| Weight | 6 lbs |
| Dimensions (W x H x D) | 4.3 x 7 x 3.57 in. |