Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Eaton Cutler-Hammer is the sole manufacturer of the JGE3090FAG circuit breaker. It is a molded case circuit breaker device. With the JG Frame covering the device, it operates with 90 Amps of current. The JGE3090FAG belongs to the G series of Eaton Cutler-Hammer circuit breakers. Its running voltage has been set at 600 Volts AC or at 250 Volts DC. This is a 3-pole device with a fixed trip type. Interruptions can be made at various stages because it has different voltage ratings. It comes with high interrupting capacity of 65 kA at 240 Volts AC, 25 kA at 480 Volts AC, and 18 kA at 600 Volts AC.
The optimal running frequency is adjustable and it depends on the type of load that is on the device. It comes with optional undervoltage release and an auxiliary switch. It comes with both line and load terminals. The JGE3090FAG comes with various protective features. It has an Arcflash Reduction maintenance system, an interchangeable trip unit, and a trip indicator. There are various alarms which give alerts for high loads and trips, ground faults, and zone selective interlocking. The JGE3090FAG has been certified with the Ul, CSA, and IEC ratings. On the front face of the device, a lever is present to toggle the breaker device on and off. A switch is also present that checks the breaker’s functionality manually. It is used over time to check the tripping function of the device. A 1-year warranty comes with the device and the warranty is valid from the date of the installation.
Part Number/Catalog No. | JGE3090FAG |
Product Type | Molded Case Circuit Breaker |
Frame | JG |
kAIC at 480 Volts AC | 25 kAIC |
Pole(s) | 3 |
Amps | 90 Amps |
Trip Unit | Fixed Adjustment |
Terminations | Line/Load Standard |
Rating | 80% |
Maximum Rated Current | 250 Amps |
Auxiliary Circuits | 690 Volts AC |
Main Conducting Paths | 8 kV |
Maximum Switching Frequency | 240 1/h |
Weight | 6 pounds |
Dimensions (W x H x D) | 4.3 x 7 x 3.57 inches |
Part Number/Catalog No. | JGE3090FAG |
Product Type | Molded Case Circuit Breaker |
Frame | JG |
kAIC at 480 Volts AC | 25 kAIC |
Pole(s) | 3 |
Amps | 90 Amps |
Trip Unit | Fixed Adjustment |
Terminations | Line/Load Standard |
Rating | 80% |
Maximum Rated Current | 250 Amps |
Auxiliary Circuits | 690 Volts AC |
Main Conducting Paths | 8 kV |
Maximum Switching Frequency | 240 1/h |
Weight | 6 pounds |
Dimensions (W x H x D) | 4.3 x 7 x 3.57 inches |