Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Series G molded case EGS3015FFB from Eaton is a 3-pole circuit breaker with an integrated thermal-magnetic trip device which is non-interchangeable. The EG-framed EGS3015FFB supports bolt-on terminals. The current and voltage ratings of the breaker are 15 Amps and 600Y/347 Volts AC. The circuit breaker is rated for 50 and 60 Hertz frequencies. Interruption capacities are 22, 35, and 85 kAIC at 600Y/347, 480, and 240 Volts AC, respectively. The 4TA160EFK, which includes aluminum terminals, is designed for # 3 to 250 AWG aluminum and copper cables, the 3TA160EFK terminal, which includes aluminum terminals designed for #3 to 250 AWG aluminum and copper cables, and the 3T12SEF terminal, which includes steel terminals designed for #14 to 3/0 steel cables are among the terminal types which are available from Eaton for use with the EGS3015FFB. Depending on requirements, the appropriate terminal and cable type can be chosen to fulfill the installation requirements. The EG-frame EGS3015FFB weighs 3 pounds. Its enclosure dimensions are 5.5 x 3.0 x 2.99 inches.
The EGS3015FFB is used in high voltage and high current systems. To minimize the risk of injury or death, in addition to following all the generally accepted safety procedures, the EGS3015FFB should always be installed by trained technicians. Moreover, the EGS3015FFB should always be switched off during installation, during maintenance, and during the inspection. The installation process comprises circuit breaker inspection, the mounting of the breaker, the attachment of the line and load terminals, the torquing of the terminals, and attachment of the load and line wires. Prior to installation, the suitability of the breaker with its intended system requirements should be confirmed.
Part Number/Catalog No. | EGS3015FFB |
Product Type | Molded Case Circuit Breaker |
Frame | EG |
kAIC at 480 Volts AC | 35 |
Pole(s) | 3 |
Amps | 15 |
Trip Unit | Fixed Thermal, Fixed Magnetic |
Terminal | Bolt-on |
Dimensions (WxHxD) | 3 x 5.5 x 2.99 inches |
Weight | 3 pounds |
Part Number/Catalog No. | EGS3015FFB |
Product Type | Molded Case Circuit Breaker |
Frame | EG |
kAIC at 480 Volts AC | 35 |
Pole(s) | 3 |
Amps | 15 |
Trip Unit | Fixed Thermal, Fixed Magnetic |
Terminal | Bolt-on |
Dimensions (WxHxD) | 3 x 5.5 x 2.99 inches |
Weight | 3 pounds |