Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The EGH1030FFB is breaker device. It comes from the Eaton Series G of complete molded case circuit breakers. It is designed and manufactured by Eaton Cutler-Hammer. The device comes inside an EG Frame body. The trip types cannot be changed manually. Both the magnetic and thermal trip types are kept constant. It is a single-pole device and it runs on 30 Amps of current. It ships with a voltage of 600Y/347 Volts AC. This breaker device is not suitable for DC applications. It comes with a bolt-on terminal only. The factory-rated running frequency for this circuit breaker device is 50 to 60 Hertz. The EGH1030FFB can be mounted by using a panel mount. It lacks a busbar.
The EGH1030FFB is 2.99 inches long, 1 inch high, and 1 inch wide. It weighs around 1 pound. The interruption for the device is maintained at 100 kAIC at 240 Volts AC and 65 kAIC at 480 Volts AC, and 35 kAIC at 600Y/347 Volts AC. It comes with a lever to power the circuit breaker device on and off. The off-side is denoted by a green color on the surface and a red color indicates the on-side. It also comes with a red switch to check if the circuit breaker is working properly or not. The factory rated minimum and the maximum operating temperature is 0 and 40 degrees Celsius. The ambient temperature for this breaker device ranges from -20 to 70 degrees Celsius. The EGH1030FFB comes with the UL, CSA, and IEC certification. The device has a 1-year warranty from the date of purchase. It is being widely used in factories and in industrial areas for protecting the entire infrastructure from current overload conditions. The circuit breaker device shuts down the device and protects the system from further electrical damage from overcurrents. During the installation of the device, the environment should be made free from electric discharges. It needs a relatively humid environment for a longer runtime.
| Part Number/Catalog No. | EGH1030FFB |
| Product Type | Molded Case Circuit Breaker |
| Frame | EG |
| kAIC at 480 Volts AC | 65 |
| Pole(s) | 1 |
| Amps | 30 |
| Trip Unit | Fixed Thermal, Fixed Magnetic |
| Terminal | Bolt-on |
| Dimensions (WxHxD) | 1 x 5.5 x 2.99 inches |
| Weight | 1.5 pounds |
| Part Number/Catalog No. | EGH1030FFB |
| Product Type | Molded Case Circuit Breaker |
| Frame | EG |
| kAIC at 480 Volts AC | 65 |
| Pole(s) | 1 |
| Amps | 30 |
| Trip Unit | Fixed Thermal, Fixed Magnetic |
| Terminal | Bolt-on |
| Dimensions (WxHxD) | 1 x 5.5 x 2.99 inches |
| Weight | 1.5 pounds |