Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Eaton Cutler-Hammer is the sole manufacturer of the EGH1015FFB device, which is a molded case circuit breaker. With the EG Frame covering the device for protection, it operates with 15 Amps of current. It is a single-phase device and it belongs to the G Series of Cutler breaker devices. The running voltage has been set at 600Y/347 Volts AC. This is a single-pole device with a fixed trip type (both magnetic and thermal). Interruptions can be made at various stages because it has different ratings. It comes with high interrupting capacity up to 100 kAIC at 240 Volts AC, 65 kAIC at 480 Volts AC, and 35 kAIC for 600Y/347 Volts AC. The EGH1015FFB runs best in the temperature range of 0 to 40 degrees Celsius.
The optimal running frequency depends on the type of load that is on the device. It runs with 50 to 60 Hertz of frequency. It comes with an optional Undervoltage release and auxiliary switch. It comes with load side lug terminals. The EGH1015FFB comes with various different features. It has longtime trip and instantaneous trip units and a trip indicator. There are various alarms inside the breaker device which send out alerts for high loads and trips, ground faults, and zone-selective interlocking. The device uses a bolt-on terminal. The breaker device has dimensions of 1 x 5.5 x 2.99 inches in width, height, and length, respectively. The breaker weighs 1.5 pounds. The EGH1015FFB has been certified with the UL, CSA, and IEC ratings. On the front face of the device, a handle is present to toggle the breaker device between the on and off states. A switch is also present that checks the breaker functionality manually. It is used over time to check the tripping function of the device. A 1-year warranty comes with the device from the date of installation.
Part Number/Catalog No. | EGH1015FFB |
Product Type | Molded Case Circuit Breaker |
Frame | EG |
kAIC at 480 Volts AC | 65 |
Pole(s) | 1 |
Amps | 15 |
Trip Unit | Fixed Thermal, Fixed Magnetic |
Terminal | Bolt-on |
Dimensions (WxHxD) | 1 x 5.5 x 2.99 inches |
Weight | 1.5 pounds |
Part Number/Catalog No. | EGH1015FFB |
Product Type | Molded Case Circuit Breaker |
Frame | EG |
kAIC at 480 Volts AC | 65 |
Pole(s) | 1 |
Amps | 15 |
Trip Unit | Fixed Thermal, Fixed Magnetic |
Terminal | Bolt-on |
Dimensions (WxHxD) | 1 x 5.5 x 2.99 inches |
Weight | 1.5 pounds |