Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Cutler-Hammer HND3800T106W is a Series C Electronic Molded Case Circuit Breaker (MCCB). It is a 3-pole breaker with high interrupting capacity, capable of dealing with 800 Amps current-rated applications. The device supports interchangeable rating plugs. In this way, users can adjust the HND3800T106W to be a good match for their system’s current consumption. Users can install rating plugs with a fixed value in the range of 400 to 800 Amps. These rating plugs are designated with the ORPN80Axxx part number, where the “xxx” can be changed with values between 400 and 800, according to the desired current protection rating. The Eaton HND3800T106W Digitrip OPTIM 1050 Electronic Circuit Breaker has fully adjustable circuit protection mechanisms. Over screwdriver rotatable potentiometers, the users can adjust long and short delay pickups with long and short delay times.
The instantaneous protection setting is also adjustable, and the ground protection is too. This device prioritizes safety. This circuit breaker delivers not only delivers innovative solutions for system overcurrent protection, but it is also designed to ensure the safety of the users manipulating with it. The HND3800T106W is a representative MCCB from Eaton that clears faults faster than similar devices manufactured by competitor companies. It features technology that significantly decreases the release of highly dangerous arc flash energy. Although this faster clearing time is measured in milliseconds, the arc energy is cut in half. This means that less arc energy will be left to endanger workers. Do not expose the device to voltages higher than 600 Volts AC, nor to frequencies outside the 50 to 60 Hertz range.
Part Number/Catalog No. | HND3800T106W |
Product Type | Molded Case Circuit Breaker |
Series | C |
Frame | N |
Poles | 3 |
Amps | 800 Amps |
Trip Model | Model 1050 |
Trip Type | LSIG |
Interrupting Capacity | 100 kAIC at 240 Volts AC |
Dimensions (W x H x D) | 8.25 x 16 x 5.5 inches |
Weight | 45 pounds |
Part Number/Catalog No. | HND3800T106W |
Product Type | Molded Case Circuit Breaker |
Series | C |
Frame | N |
Poles | 3 |
Amps | 800 Amps |
Trip Model | Model 1050 |
Trip Type | LSIG |
Interrupting Capacity | 100 kAIC at 240 Volts AC |
Dimensions (W x H x D) | 8.25 x 16 x 5.5 inches |
Weight | 45 pounds |