Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The 100% rated Eaton CND3800T107W is a complete 3-pole circuit breaker. It is a CND type of circuit breaker with 800 Amps of current rating and 600 Volts AC of voltage rating. The frequency specifications for the breaker are 50 and 60 Hertz. It is rated at 85 kAIC at 240 Volts AC and at 50 kAIC at 480 Volts AC. The operation of the CND3800T107W at 100% rating requires an enclosure with the following dimensions: a minimum of 1066.8 millimeters in height, 577.85 millimeters in width, and 292.1 millimeters in depth. The complete CND3800T107W is supplied with an electronic OPTIM 1050 LSIA trip module. The 1050 is a programmable unit and it supports diagnostics, communications, RMS sensing, and monitoring of the load, current harmonics, power, and energy. The trip unit can be damaged by hi-potting or the application of external power to any combination of the yellow, green, gray, or white leads. Damage to the trip unit could lead to death, severe personal injury, or property damage.
Connections to these leads should only be made as recommended by the manufacturer and detailed in the relevant installation manual. However, terminals are not provided with the breaker. The NG-frame CND3800T107W weighs 20.4 kilograms and ventilation space is not a requirement for the CND3800T107W. The CND3800T107W must be operated with the cover installed. To prevent breaker damage and nuisance tripping, a joint compound should be used when aluminum conductors are used. Hazardous voltages can lead to death or severe injury and therefore creepage spacings and the original specified electrical clearances should be maintained at the terminations.
| Part Number/Catalog No. | CND3800T107W |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | N |
| Poles | 3 |
| Amps | 800 Amps |
| Trip Model | Model 1050 |
| Trip Type | LSIA |
| Interrupting Capacity | 65 kAIC at 240 Volts AC |
| Dimensions (W x H x D) | 8.25 x 16 x 5.5 inches |
| Weight | 45 pounds |
| Part Number/Catalog No. | CND3800T107W |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | N |
| Poles | 3 |
| Amps | 800 Amps |
| Trip Model | Model 1050 |
| Trip Type | LSIA |
| Interrupting Capacity | 65 kAIC at 240 Volts AC |
| Dimensions (W x H x D) | 8.25 x 16 x 5.5 inches |
| Weight | 45 pounds |