Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Eaton CND312T107W is a CND type 1200 Amps/600 Volts AC rated electronic circuit breaker. The CND312T107W supports operation at a 100% rating in an enclosure measuring at least 42 x 22.75 x 11.5 inches in dimensions. The CND312T107W has a weight of 45 pounds and its dimensions are the following: 8.25 inches in width, 8.25 inches in height, and 5.5 inches length. The CND312T107W requires a ventilation space of 0.0258 square meters to the left, 0.0258 square meters to the right, 0.0465 square meters to the top, and 0.0465 square meters to the bottom of the device. The CND312T107W is a 3-pole NG-frame device which does not include terminals. It must be used with supplied conductor extensions and terminal barriers. Only AL9CU or copper terminals and 194 degrees Fahrenheit rated wire are recommended for use with this device. It supports 50 to 60 Hertz of frequency. The following are the interrupt capacity ratings for the CND312T107W: 50 kAIC at 480 Volts AC and 85 kAIC at 240 Volts AC.
The CND312T107W must be installed only after its specifications comply with all the system requirements. Precautions to be following during installation include switching off the breaker and other electrical equipment and clearing the working area of all voltage. The breaker cover constrains the moving breaker parts and it should always be in place during operation. The CND312T107W is provided with an OPTIM 1050 trip unit (LSIA option) which supports advanced features including diagnostics, true RMS sensing, and the monitoring of various breaker parameters, including current and energy. An overload trip is initiated within 2 hours when a 135% overload occurs, and it is initiated in less time for overloads higher than 135%.
| Part Number/Catalog No. | CND312T107W |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | N |
| Poles | 3 |
| Amps | 1200 Amps |
| Trip Model | Model 1050 |
| Trip Type | LSIA |
| Interrupting Capacity | 65 kAIC at 240 Volts AC |
| Dimensions (W x H x D) | 8.25 x 16 x 5.5 inches |
| Weight | 45 pounds |
| Part Number/Catalog No. | CND312T107W |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | N |
| Poles | 3 |
| Amps | 1200 Amps |
| Trip Model | Model 1050 |
| Trip Type | LSIA |
| Interrupting Capacity | 65 kAIC at 240 Volts AC |
| Dimensions (W x H x D) | 8.25 x 16 x 5.5 inches |
| Weight | 45 pounds |