Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The KT2150T Thermal-Magnetic Trip Unit is an Eaton Cutler-Hammer trip unit assembly in the Series C Frame K line of breakers, that is used for circuit protection in most low-voltage systems. This trip unit is 80% rated, like every Eaton Cutler-Hammer Thermal-Magnetic trip units, and it features high-speed blow-open action, made possible by electromechanical force. The KT2150T is a 2-pole deigned trip unit, with 150 Amps of nominal current rating, and with an interrupt capacity of 35 kAIC at 480 Volts AC. It is also designed for applications with a maximum operating voltage of Volts AC, and like every Frame K trip unit, it is HACR rated and it can be used in reverse feed wiring.
The KT2150T thermal-magnetic trip unit, it has adjustable thermal and magnetic trip elements, and its magnetic trip element can be adjusted in the field up to 10 times the nominal rating. It uses a line current-heated bimetal strip for thermal trip action, and because this bimetal strip deflects upon a prolonged overload, causing a very fast acting trip action. It also provides magnetic trip action using a series of connected electromagnets, which causes an instantaneous trip action because the circuit current exceeds the designated value. The KT2150T is 80% rated within an ambient temperature limit of 40 degrees Celsius or less, and it can be calibrated in the field for a higher ambient temperature (50 degrees Celsius maximum). It is designed for use within a 0 to 95% non-condensing relative humidity range, and it will start de-rating at more than 6000 feet above sea level. The KT2150T has a net weight of 0.70 kilograms (trip unit only), and it is built to meet the CSA and UL standards.
| Part Number/Catalog No. | KT2150T |
| Product Type | Trip Unit |
| Series | C |
| Frame | K |
| Poles | 2 |
| Amps | 150 |
| Unit Type | Thermal-Magnetic |
| Continuous Current Range | 55 to 400 Amps |
| Dimensions (W x H x D) | 5.5 x 10.13 x 4.1 inches |
| Weight | 1.5 pounds |
| Part Number/Catalog No. | KT2150T |
| Product Type | Trip Unit |
| Series | C |
| Frame | K |
| Poles | 2 |
| Amps | 150 |
| Unit Type | Thermal-Magnetic |
| Continuous Current Range | 55 to 400 Amps |
| Dimensions (W x H x D) | 5.5 x 10.13 x 4.1 inches |
| Weight | 1.5 pounds |