Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The KDC3250T52W is an OPTIM 550 electronic case circuit breaker from the C Series of electronic molded case circuit breakers. This breaker has been launched by Cutler-Hammer and included in the K frame product line. The Cutler-Hammer KDC3250T52W OPTIM 550 electronic case circuit breaker has an amperage rating of 250 Amps and a frequency of 50 to 60 Hertz. This circuit breaker operates with a voltage rating of 600 Volts AC or 250 Volts DC. The Cutler-Hammer KDC3250T52W OPTIM 550 electronic case circuit breaker features 3 poles and an internal discriminator with an instantaneous override, both of which ensure that it operates within its parameters and that it reacts without delays when closing and opening, providing in this way the protection needed.
The recommended ambient temperature for the Cutler-Hammer KDC3250T52W OPTIM 550 electronic case circuit breaker ranges from -20 to 85 degrees Celsius. This breaker includes an over-temperature trip that protects the breaker if the temperature exceeds the recommended range. The Cutler-Hammer KDC3250T52W OPTIM 550 electronic case circuit breaker has high load alarms that can be fully programmed. One of them is used as a ground fault trip and the other one as a ground fault alarm. The generated signal for an OPTIM 550 is remote. Another important feature of the Cutler-Hammer KDC3250T52W OPTIM 550 electronic case circuit breaker is that it has the capability of monitoring currents, including neutral currents and ground currents in individual phases. The Cutler-Hammer KDC3250T52W OPTIM550 electronic case circuit breaker has a width of 5.5 inches, a length of 4.1 inches, and a height of 5.5 inches. The approximate shipping weight of the device is 11.5 pounds.
Part Number/Catalog No. | KDC3250T52W |
Product Type | Molded Case Circuit Breaker |
Series | C |
Frame | K |
Poles | 3 |
Amps | 250 Amps |
Unit Type | OPTIM |
Interrupting Capacity | 200 kAIC at 240 Volts AC |
Dimensions (W x H x D) | 5.5 x 10.13 x 4.1 inches |
Weight | 11.5 pounds |
Part Number/Catalog No. | KDC3250T52W |
Product Type | Molded Case Circuit Breaker |
Series | C |
Frame | K |
Poles | 3 |
Amps | 250 Amps |
Unit Type | OPTIM |
Interrupting Capacity | 200 kAIC at 240 Volts AC |
Dimensions (W x H x D) | 5.5 x 10.13 x 4.1 inches |
Weight | 11.5 pounds |