Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Eaton Cutler-Hammer KDC3200 Molded Case Circuit Breaker is a general purpose circuit breaker in the C series, K Frame family of factory assembled thermal-magnetic circuit breakers, with an interchangeable trip unit. This circuit breaker comes standard with line and load terminals designed to meets users wiring needs, and it also has a 3-pole wiring designed suited for 3-phase and 1-phase applications. The KDC3200 has a continuous current rating of 200 Amps, and it is rated for Ultra High Interrupting Capacity Current Limiting applications, with a very high interrupting capacity of 100 KAIC. It is designed for applications with a maximum operating voltage of 600 Volt AC or 250 Volt DC, and it can be wired for reverse feed use.
The KDC3200 consist of a standard Copper/Aluminium line and load terminals (TA300K), and adjustable trip unit, and a frame enclosure made of insulation material. It provides both thermal and magnetic trip action achieved by a bimetal strip which will deflect upon being heated by prolonging current overload and an electromagnet which will cause a very fast acting trip action when the line load current reaches a designated value set by users. The KDC3200’s operation status is indicated via an operating mechanism, which indicates the position of the breaker (Tripped, OFF, or ON), and it also provides means of operating the breakers contact. The KDC3200 is designed to operate around a temperature below 40 degree Celsius, and it can be used within 0 to 95% non-condensing relative humidity condition. It has a net weight of 5.2 Kilograms (11.5 pounds) and an approximate volume of 149.7 x 257.3 x 104.1 millimeters (5.5 x 10.1 x 4.1 inches).
| Part Number/Catalog No. | KDC3200 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | K |
| Poles | 3 |
| Amps | 200 |
| Unit Type | Thermal-Magnetic |
| Interrupting Capacity | 200 kA @ 240V AC |
| Dimensions (W x H x D) | 5.5 x 10.13 x 4.1 in. |
| Weight | 11.5 lbs |
| Part Number/Catalog No. | KDC3200 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | K |
| Poles | 3 |
| Amps | 200 |
| Unit Type | Thermal-Magnetic |
| Interrupting Capacity | 200 kA @ 240V AC |
| Dimensions (W x H x D) | 5.5 x 10.13 x 4.1 in. |
| Weight | 11.5 lbs |