Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The KD4100 is a Type KD, 4-Pole, Series-C Cutler-Hammer thermal-magnetic circuit breaker with interchangeable trip units manufactured by Eaton. It has a K-frame and it is rated at 600 Volts AC or 250 Volts DC maximum operating voltage, 100 Amps trip current, 10 kIAC at 250 Volts DC, 25 kIAC at 600 Volts AC, 35 kIAC at 4800 Volts AC, and 65 kIAC at 240 Volts AC, at 50 to 60 Hertz frequency. It is typically used for control, branch and main short circuit protection, as well as overload protection for different kinds of equipment and circuitry. Like all K-Frame Series C Cutler-Hammer circuit breakers that have interchangeable trip units, the KD4100 circuit breaker is suitable for reverse feed use and it can be vertically or horizontally mounted on a panel board or in a NEMA enclosure.
All 4 poles onboard the KD4100 feature line and load terminals as well as adjustable thermal and adjustable magnetic trip units. The switch’s position as well as the color strip below it indicate the on, off, or tripped status of the circuit breaker and its very fast blow open action greatly reduces trip delay time. The casing of the KD4100 thermal-magnetic circuit breaker is molded from quality glass-polyester material to withstand different environments and to protect the internal components. It is factory-assembled with its standard components but it can be used with internal and external accessories including undervoltage trip mechanisms, a shunt trip, an alarm switch, or terminal shields to prevent accidental contact with the terminals when they are live.
| Part Number/Catalog No. | KD4100 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | K |
| Poles | 4 |
| Amps | 100 |
| Unit Type | Thermal-Magnetic |
| Interrupting Capacity | 65 kA @ 240V AC |
| Dimensions (W x H x D) | 7.22 x 10.13 x 4.1 in. |
| Weight | 11.5 lbs |
| Part Number/Catalog No. | KD4100 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | K |
| Poles | 4 |
| Amps | 100 |
| Unit Type | Thermal-Magnetic |
| Interrupting Capacity | 65 kA @ 240V AC |
| Dimensions (W x H x D) | 7.22 x 10.13 x 4.1 in. |
| Weight | 11.5 lbs |