Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The KD3175 is a thermal magnetic circuit breaker from Eaton/Westinghouse/Cutler-Hammer. The circuit breaker has 3 poles and it is molded to protect 3-phase power circuits. The KD3175 has a maximum continuous current of 175 Amps and it features an interchangeable trip unit. With a K-frame type, the KD3175 is by default shipped in individual parts that the users can assemble. If the circuit breaker needs to be factory-assembled, this has to be explicitly stated when ordering. Note that a factory assembled KD3175 does not provide room for user replacement of individual components, including the tripping unit. The Eaton KD3175 molded case circuit breaker has a rated maximum voltage of 600 Volts AC or 250 Volts DC depending whether the circuit breaker is used in AC or DC-powered systems. The KD3175 has standard terminals on both the line and load sides.
The interrupt rating for the Eaton/Westinghouse/Cutler-Hammer KD3175 circuit breaker, under the IEC 157-1 standards, is 40 kAIC at both 380 and 415 Volts AC. Additionally, the KD3175 has 65 kAIC at 240 Volts AC. Note that under these standards, the KD3175 has no interrupt capacity ratings for voltages between 440 and 600 Volts AC. The Eaton/Westinghouse/Cutler-Hammer KD3175 provides for an optional alarm switch, an optional undervoltage release, and an optional shunt trip for safety. The circuit breaker is approved by the Underwriters Laboratories, the Canadian Standards Association, and the Japanese T-Mark Standards for molded case circuit breakers. The operating frequency for the KD3175 stands at 50 to 60 Hertz.
| Part Number/Catalog No. | KD3175 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | K |
| Poles | 3 |
| Amps | 175 Amps |
| Unit Type | Thermal-Magnetic |
| Interrupting Capacity | 65 kA at 240 Volts AC |
| Dimensions (W x H x D) | 5.5 x 10.13 x 4.1 inches |
| Weight | 11.5 pounds |
| Part Number/Catalog No. | KD3175 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | K |
| Poles | 3 |
| Amps | 175 Amps |
| Unit Type | Thermal-Magnetic |
| Interrupting Capacity | 65 kA at 240 Volts AC |
| Dimensions (W x H x D) | 5.5 x 10.13 x 4.1 inches |
| Weight | 11.5 pounds |