Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The KD2400 is a Cutler-Hammer (a division of the Eaton Corporation) molded case circuit breaker from C Series. Its current rating is 400 Amps and it is delivered in a KD frame sized housing. Users should know the type of distribution system they have and how the KD2400 should be applied in their systems. This information is needed to see if the 600 Volts AC or 250 Volts DC rating of this MCCB fits their needs. These values are the maximum voltages that can be applied across the device’s terminals. This molded case circuit breaker has 2 poles. It has an interrupting capacity of 35 kAIC at 480 Volts AC and 10 kAIC at 250 Volts DC. The KD2400 is usually installed in panelboards and switchboards where it is fixed or mounted. This MCCB has 4 integral parts – contacts, a molded case (KD frame), a trip unit, and an operating mechanism. The operational quality of the device is temperature-dependent.
When the device is operated at temperatures lower than 40 degrees Celsius (the maximum calibration temperature), the breaker will be able to carry more current than its nameplate’s current rating. At higher temperatures, the opposite will happen with its current holding capacity. The Cutler-Hammer KD2400’s housing dimensions are 5.5 inches x 10.1 inches x 4.1 inches (150 millimeters x 257 millimeters x 104 millimeters). The item weighs 10 pounds (4.5 kilograms). To mount this circuit breaker, drill the mounting panel by using the drilling plan provided with the instructions sheet and then install the MCCB’s mounting screws, washers, and nuts. Make sure to leave enough space free for wire connections. Tighten the mounting screws tightly.
| Part Number/Catalog No. | KD2400 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | K |
| Poles | 2 |
| Amps | 400 |
| Unit Type | Thermal-Magnetic |
| Interrupting Capacity | 65 kA @ 240V AC |
| Dimensions (W x H x D) | 5.5 x 10.13 x 4.1 in. |
| Weight | 10 lbs |
| Part Number/Catalog No. | KD2400 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | K |
| Poles | 2 |
| Amps | 400 |
| Unit Type | Thermal-Magnetic |
| Interrupting Capacity | 65 kA @ 240V AC |
| Dimensions (W x H x D) | 5.5 x 10.13 x 4.1 in. |
| Weight | 10 lbs |