Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The KD2300 is a K-frame circuit breaker that is designed and manufactured by Cutler-Hammer, a division of the Eaton Corporation. At 40 degrees Celsius, the KD2300 as a 300 Amps continuous current rating. The tripping unit used by the circuit breaker uses a thermal-magnetic tripping mechanism. The mechanism uses a tripping arm that is located on the face panel of the breaker. The tripping arm is used to ease the troubleshooting procedures by showing the current status of the KD2300 circuit breaker. The breaker only has 3 statuses, which are on, tripped, and off. The circuit breaker assumes the tripped status when the circuit breaker detects a short circuit.
Additionally, the KD2300 molded case circuit breaker is turned on when it is actively protecting the circuit against any malfunctioning. Switching it off locks out parts of the circuit and prevents them from being powered. The KD2300 has a fourth status position, reset, which is located beyond the off position and it is used to put the KD2300 circuit breaker back into active circuit protection. The KD2300 has 2 poles and a maximum voltage rating of 600 Volts AC in an alternating current environment and the voltage rating is 250 Volts DC in a direct current environment. With a K-frame type, the KD2300 is supplied with its line and load terminals separately to ease field installation. Note that a factory-assembled KD2300 molded case circuit breaker is also included, but it has to be specified when ordering. When installing the circuit breaker, a copper or aluminum wire type is used. The KD2300 terminals are also made of either copper or aluminum.
| Part Number/Catalog No. | KD2300 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | K |
| Poles | 2 |
| Amps | 300 Amps |
| Unit Type | Thermal-Magnetic |
| Interrupting Capacity | 65 kA at 240 Volts AC |
| Dimensions (W x H x D) | 5.5 x 10.13 x 4.1 inches |
| Weight | 10 pounds |
| Part Number/Catalog No. | KD2300 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | K |
| Poles | 2 |
| Amps | 300 Amps |
| Unit Type | Thermal-Magnetic |
| Interrupting Capacity | 65 kA at 240 Volts AC |
| Dimensions (W x H x D) | 5.5 x 10.13 x 4.1 inches |
| Weight | 10 pounds |