Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The KD2200 is an Eaton Cutler-Hammer (Division of Eaton Corporation) molded case circuit breaker. This MCCB is part of the C Series circuit breakers. The KD2200 has a current rating of 200 Amps (at 40 degrees Celsius). The device has 2 poles that can be supplied with a maximum power of 600 Volts AC or 250 Volts DC. The interrupting capacity of the KD2200 is 35 kAIC at 480 Volts AC and 10 kAIC at 250 Volts DC. These values put this MCCB to the standard interrupting capacity class of circuit breakers. The item is factory pre-assembled and it consists of a molded case, terminals, and a trip unit. Mount and fix the KD2200 to panelboards and switchboards. Once installed, it will provide continuous protection to all the connected devices.
It provides effective protection when it comes to overcurrents and short-circuits. Its protection is based on the thermal trip element (for overcurrents) and the magnetic trip element (for short-circuits). When the electromechanical trip mechanism is actuated, the handle that is visible on the front of the MCCB goes into the middle (“Trip”) position. If this happens, users should check their equipment for the trip’s cause. When the obstacle causing the trip situation is cleared, users should reset the device by pulling the handle down to the “OFF” position and then up to the “ON” position. The Eaton KD2200 is packed in a KD frame housing that has dimensions of 5.50 inches x 10.13 inches x 4.10 inches (150 millimeters x 257 millimeters x 104 millimeters). Its shipping weight is approximated at 4.5 kilograms (10 pounds). The device can be mounted either horizontally or vertically.
| Part Number/Catalog No. | KD2200 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | K |
| Poles | 2 |
| Amps | 200 |
| Unit Type | Thermal-Magnetic |
| Interrupting Capacity | 65 kA @ 240V AC |
| Dimensions (W x H x D) | 5.5 x 10.13 x 4.1 in. |
| Weight | 10 lbs |
| Part Number/Catalog No. | KD2200 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | K |
| Poles | 2 |
| Amps | 200 |
| Unit Type | Thermal-Magnetic |
| Interrupting Capacity | 65 kA @ 240V AC |
| Dimensions (W x H x D) | 5.5 x 10.13 x 4.1 in. |
| Weight | 10 lbs |