Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The HKD3400T107W circuit breaker is a thermal magnetic circuit breaker that has been designed as well as manufactured by the Eaton Cutler-Hammer company. The Eaton Cutler-Hammer HKD3400T107W circuit breaker is part of Series C of the Eaton HKD type of molded case circuit breakers. The Eaton Cutler-Hammer HKD3400T107W circuit breaker feature 3 poles, 3-phase configuration, 400 Amps of current rating, 600 Volts AC of power rating, 65 kAIC of interrupting capacity at 480 Volts AC, and an interchangeable rating plug. The Eaton Cutler-Hammer HKD3400T107W circuit breaker is contained in a Frame K type of enclosure. The Eaton Cutler-Hammer HKD3400T107W thermal magnetic circuit breaker is equipped with the GFR ground fault protection system which detects phase-to-ground fault currents.
The Eaton Cutler-Hammer HKD3400T107W thermal magnetic circuit breaker also has a solenoid component for under-voltage protection purposes. The Cutler-Hammer HKD3400T107W circuit breaker is configured with electromechanical trip units that feature several ranges of magnetic pickup ranges. The Eaton Cutler-Hammer HKD3400T107W circuit breaker field interchangeable electronic sensing trip units that consist of instantaneous pickup settings that conform to the Federal Regulations in the 30 CFR 75.601-2 code. The Eaton Cutler-Hammer HKD3400T107W circuit breaker is applicable in both ungrounded applications and in the specific selected grounded applications with the circuit breaker’s 3 poles connected in series in order for it to operate at its maximum voltage. To employ the Eaton Cutler-Hammer HKD3400T107W thermal magnetic circuit breaker on 600 Volts rated grounded systems, the 3 poles which are in series should be attached on the circuit breaker’s ungrounded leg.
Part Number/Catalog No. | HKD3400T107W |
Product Type | Molded Case Circuit Breaker |
Series | C |
Frame | K |
Poles | 3 |
Amps | 400 Amps |
Unit Type | OPTIM |
Interrupting Capacity | 100 kA at 240 Volts AC |
Dimensions (W x H x D) | 5.5 x 10.13 x 4.1 inches |
Weight | 11.5 pounds |
Part Number/Catalog No. | HKD3400T107W |
Product Type | Molded Case Circuit Breaker |
Series | C |
Frame | K |
Poles | 3 |
Amps | 400 Amps |
Unit Type | OPTIM |
Interrupting Capacity | 100 kA at 240 Volts AC |
Dimensions (W x H x D) | 5.5 x 10.13 x 4.1 inches |
Weight | 11.5 pounds |