Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The GHBGFEP1030 is a 1-pole Cutler-Hammer Type GHB bolt-on panelboard industrial ground fault circuit protector manufactured by the Eaton Corporation. It is part of the Series C family and it is rated at 30 Amps continuous current, 277 Volts of maximum voltage, 240 Volts to 305 Volts of operating voltage, at 50 to 60 Hertz. It weighs 0.453 kilograms and its dimensions in inches are 5.1 x 3.9 x 7.5 inches. The GHBGFEP1030 ground fault circuit protector is a special purpose circuit breaker for single-phase systems such as single-phase motor circuits and other equipment that is within its ratings. The GHBGFEP1030 ground fault circuit protector features a test button for manually opening the circuit without the toggle switch and for testing its performance.
It features an extended tag terminal on the line that is directly bolted to the bus while the load terminal is a screw clamp terminal and it has fixed thermal magnetic trip as well as a non-interchangeable trip. Its arc extinguishing technology improves safety and its compact design saves more panel space compared to standard circuit breakers. Note that the GHBGFEP1030 ground fault circuit protector it is not suitable for general purpose use. It is built with high repulsion contacts and it uses a standard toggle type switch as an operating mechanism. The switch also indicates its on, off, or tripped status. After a trip-out, the GHBGFEP1030 ground fault circuit protector must be manually reset by switching it to the reset position before reclosing the circuit after the thermal element has cooled. It is important to ensure that all terminals of the GHBGFEP1030 are screwed or bolted properly to avoid arcing and overheating, which can cause nuisance trips.
| Part Number/Catalog No. | GHBGFEP1030 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | G |
| Type | Bolt-On Panelboard 30 mA Industrial Ground Fault |
| Pole(s) | 30 |
| Trip Amps | 14 |
| kA @ 125 VDC | 4 x 3 x 2.63 in. |
| Part Number/Catalog No. | GHBGFEP1030 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | G |
| Type | Bolt-On Panelboard 30 mA Industrial Ground Fault |
| Pole(s) | 30 |
| Trip Amps | 14 |
| kA @ 125 VDC | 4 x 3 x 2.63 in. |