Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The GHB2100 is a 2-pole, G-Frame, Series-C Cutler-Hammer thermal-magnetic circuit breaker manufactured by the Eaton Corporation. It has ratings of 227 to 480 Volts AC or 125 to 250 Volts DC, 100 Amps continuous current, 65 kAIC at 240 Volts AC, 14 kAIC at 277 to 480 Volts AC, and it weighs 0.513 kilograms. It features 2 load terminals and 2 extended connectors for the lines that are directly bolted to the bus during installation. The GHB2100 circuit breaker is suitable for providing control and circuit protection for different types of equipment and resistive loads. Like other Cutler-Hammer Type GHB Series C thermal-magnetic circuit breakers, the GHB2100 thermal-magnetic breaker can be mounted vertically or horizontally on a surface panel or DIN rail, depending on the user’s needs or preferences.
It has a non-interchangeable trip and is typically used as a branch and main circuit protection for different industrial floor and field applications. Its compact design meets space-saving needs and it provides improved performance as well as integral ground protection. To ensure optimum performance, the Cutler-Hammer GHB2100 circuit breaker should be used in an environment where it will not be exposed to corrosive gases, grease, or dirt, and both the line and load terminals should be properly fastened to avoid arcing, partial contact. Failure to bolt the terminals properly could result in nuisance trips due to overheating at the load or line terminals. A joint compound should be used when the GHB2100 thermal-magnetic circuit breaker is installed with aluminum conductors, and its power rating must not be exceeded.
| Part Number/Catalog No. | GHB2100 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | G |
| Type | Bolt-On Panelboard |
| Pole(s) | 100 |
| Trip Amps | 14 |
| kA @ 125 VDC | 4 x 3 x 2.63 in. |
| Part Number/Catalog No. | GHB2100 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | G |
| Type | Bolt-On Panelboard |
| Pole(s) | 100 |
| Trip Amps | 14 |
| kA @ 125 VDC | 4 x 3 x 2.63 in. |