Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The GD3080 is a 3-pole, Series C G-Frame Cutler-Hammer thermal magnetic circuit breaker manufactured by the Eaton Corporation. Its interrupting capacity ranges between 65 kiloamps at 240 Volts AC, 22 kiloamps at 480 volts AC, and 10 kiloamps at 250 Volts DC, 80 Amps of maximum continuous current, 480 Volts AC or 250 Volts DC maximum voltage, and it weighs 1 kilogram. It is suitable for reverse feed use and for providing equipment control and protection in a wide range of industries and for different applications such as main and branch circuit protection in motor control centers, motors, panelboards, and distribution systems. The GD3080 circuit breaker features non-interchangeable trips and terminals for line and load. Each of the 6 terminals (2 for each pole) can be used with an end cap kit or a keeper nut, both of which act as adapters to facilitate the use of the ring or bolt-on line and load conductor connectors on both terminals.
Terminal shields can also be used on both the line and load ends of the circuit breaker. To control or protect multiple devices and equipment with the GD3080 circuit breaker, multiwire connectors can be used on the load side for distributing the load without the need for separate terminal blocks. Note that leaving any terminal loose on the GD3080 circuit breaker can result in arcing and overheating, both of which can lead to frequent tripping. The rugged casing of the GD3080 circuit breaker is designed from glass-polyester to meet the demands of different work environments. Its casing repels fungus growth and moisture, and it provides sturdy insulation for internal components and accessories. The GD3080 can be used for a wide variety of applications but special termination applications may require the use of interphase barriers to providing more electrical clearance for all 3 poles of the GD3080 thermal magnetic circuit breaker.
| Part Number/Catalog No. | GD3080 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | G |
| Type | Thermal-Magnetic |
| Pole(s) | 80 |
| Trip Amps | 22 |
| kA @ 480V | 4.88 x 3 x 2.63 in. |
| Part Number/Catalog No. | GD3080 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | G |
| Type | Thermal-Magnetic |
| Pole(s) | 80 |
| Trip Amps | 22 |
| kA @ 480V | 4.88 x 3 x 2.63 in. |