Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Eaton HFDE322536 is a Series C, electronic HFDE circuit breaker. HFDE breakers support application requirements ranging from a minimum of 15 to a maximum of 225 Amps. They fulfill the IEC 157-1 requirements. The HFDE322536 is a three-pole device. It is based on an Electronic LSIG tripping unit. Following are the current, voltage, and frequency ratings: 225 Amps is the current rating, 250 Volts DC and 600 Volts AC are the voltage ratings, and 50/60 Hertz are the frequency ratings. Following are the kilo-Amps interrupting capacity ratings of the HFDE322536: 100 kAIC at 240 Volts AC and 65 kAIC at 480 Volts AC. The HFDE322536 is equipped with aluminum terminals on the load side.
The recommended wire types for the termination are copper or aluminum with 0.038 to 0.147 square inches in diameter. Overheating aluminum terminals can lead to nuisance tripping and damage to the breaker. Therefore, use of a joint compound is recommended to prevent terminal overheating. To confirm its suitability for use, the specifications of the HFDE322536 should be compared to system requirements before circuit breaker installation. The following precautions must always be followed during installation to ensure equipment and technical staff safety: the circuit breaker should be off, the voltages should be absent from the working area, and the associated electrical equipment should be de-energized. Maintenance and testing of HFDE322536 should always be carried out when it is powered off. The F-frame HFDE322536 has a weight of 4.2 pounds. Its dimensions are as follows: 6 inches in height, 4.12 inches in width, and 3.37 inches in depth.
| Part Number/Catalog No. | HFDE322536 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 3 |
| Trip Amps | 100 kA at 240V |
| Interrupting Capacity | 4.5 lb |
| Weight | 310+ |
| Trip Unit | 4.13 x 6 x 3.38 in. |
| Part Number/Catalog No. | HFDE322536 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 3 |
| Trip Amps | 100 kA at 240V |
| Interrupting Capacity | 4.5 lb |
| Weight | 310+ |
| Trip Unit | 4.13 x 6 x 3.38 in. |