Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Eaton HFDE316035 is a Series C 3-Pole Electronic Molded Case Circuit Breaker. It is equipped with an electronic non-interchangeable trip unit. This trip unit is microprocessor-controlled. It is the base of the HDFE316035 over-current protective module that performs different protective functions. The unit makes electronic LSG trips. The LSG stands for the long-time/short-time/ground type of protection. Users can install this device to protect applications with low voltage power circuits. The device has independently adjustable short time pickup with I2t short delay and ground fault protection. The Eaton HFDE316035 is a very reliable device that can be applied to circuits which are supplied with the maximum of 160 Amps. The voltage supply must not exceed 600 Volts AC or 250 Volts DC. On the front of the device, there is a test/alarm button which users can use to bring the module to the trip position manually.
Users can set the current protection value on this circuit breaker without having to remove the enclosure. The setting is conducted over the calibrated knob on the front side of the module. The reaction of the device is defined with the protective curve which indicates the available protective functions. It shows the link of overcurrent value with the time needed for the trip unit to open the circuit. Prior to putting the Eaton HFDE316035 circuit breaker in operation, its protection setting must be customized to the users’ application needs and set to the appropriate values by the person responsible for the installation. During the installation, please make sure that the equipment is not energized.
Part Number/Catalog No. | HFDE316035 |
Product Type | Molded Case Circuit Breaker |
Series | C |
Frame | F |
Pole(s) | 3 |
Trip Amps | 100 kA at 240 Volts |
Interrupting Capacity | 4.5 pounds |
Weight | 310+ |
Trip Unit | 4.13 x 6 x 3.38 inches |
Part Number/Catalog No. | HFDE316035 |
Product Type | Molded Case Circuit Breaker |
Series | C |
Frame | F |
Pole(s) | 3 |
Trip Amps | 100 kA at 240 Volts |
Interrupting Capacity | 4.5 pounds |
Weight | 310+ |
Trip Unit | 4.13 x 6 x 3.38 inches |