Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The HFD2125 is a 2-pole circuit breaker manufactured by the Eaton Corporation and it features the F frame type and size. The HFD2125 comes with a maximum voltage of 250 Volts DC and 600 Volts AC with support for up to 125 Amps. The circuit breaker features special non UL-listed calibrations that are available for various ambient temperatures above 40 degrees Celsius and frequencies other than 50 or 60 Hertz. The HFD2125 is available as a complete circuit breaker with internal accessories installed on it straight from the factory and it can also be sold as individual parts. The Eaton’s circuit breakers feature various standardizations, making it a globally accepted circuit breaker. Bearing local and international conformance codes, the Eaton’s trip units have gained acceptance throughout the global market. The HFD2125 bears the HACR rating and it is a suitable circuit breaker used commonly for high-intensity discharge use.
The HFD2125 is also ideal for reverse feed use and it has a time constant of 3 milliseconds at a minimum of 10 kA and a minimum of 8 milliseconds at 22 kA. The HFD2125 is classified as a current limiting circuit breaker with support for various non-inductive circuits. The HFD2125 is manufactured with shipping dimensions of 7.5 inches in length, 3.25 inches in height, and 5 inches in width, and it weighs 2.93 pounds. The HFD2125 has the UL listing certification with an interrupting rating of 100 kilo amperes interrupting capacity at 240 Volts AC and 65 kilo amperes interrupting capacity at 480 Volts AC. The HFD2125 comes as a factory-sealed circuit breaker and it has the standard mounting location, featuring the leads exit rear or breaker. It has an auxiliary switch option which provides the circuit protector with contact status information by constantly monitoring the crossbar that comes with the moving contact arms.
| Part Number/Catalog No. | HFD2125 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 2 |
| Trip Amps | 100 kA @ 240V |
| Interrupting Capacity | 3 lb |
| Weight | Thermal-Magnetic |
| Trip Unit | 2.75 x 6 x 3.38 in. |
| Part Number/Catalog No. | HFD2125 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 2 |
| Trip Amps | 100 kA @ 240V |
| Interrupting Capacity | 3 lb |
| Weight | Thermal-Magnetic |
| Trip Unit | 2.75 x 6 x 3.38 in. |