Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Eaton HFD1030 is a complete HFD Series-C circuit breaker. The HFD1030 is HACR-rated and suitable for applications with high-intensity discharge and reverse feed requirements. HFD type circuit breakers are offered for 10 to 225 Amps applications. The single-pole HFD1030 has a current rating of 30 Amps and a voltage rating of 347 Volts AC and 125 Volts DC. It utilizes a fixed magnetic and fixed thermal trip module. The frequencies supported are 50/60 Hertz. Load side terminals are included with the circuit breaker. At 240 Volts AC, the HFD1030 is rated for 100 kilo-Amps interrupting capacity and at 480 Volts AC it is rated at 65 kilo-Amps interrupting capacity.
The HFD1030 is UL-certified and it is therefore sealed at the factory after the installation of optional accessories. Where local codes permit, field installation of accessories can be performed. Un-mounted terminations and mounting hardware (where required) are provided in separate packages. Prior to installation, the suitability of the HFD1030 for installation requirements should be verified by comparing the system requirements with circuit breaker specifications. For the safety of the personnel involved in installation and maintenance, it is highly recommended that the HFD1030 be installed and serviced only when the circuit breaker is in the off position and the associated electrical systems have been de-energized. All local health and safety regulations and procedures should also be followed. The HFD1030 is an F-frame circuit breaker with a height of 152.4 millimeters, a width of 35 millimeters, and a depth of 85.8 millimeters. The weight of the device is 0.9 kilograms.
| Part Number/Catalog No. | HFD1030 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 1 |
| Trip Amps | 65 kA at 277V |
| Interrupting Capacity | 2 lb |
| Weight | Thermal-Magnetic |
| Trip Unit | 1.38 x 6 x 3.38 in. |
| Part Number/Catalog No. | HFD1030 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 1 |
| Trip Amps | 65 kA at 277V |
| Interrupting Capacity | 2 lb |
| Weight | Thermal-Magnetic |
| Trip Unit | 1.38 x 6 x 3.38 in. |