Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Cutler-Hammer Eaton FDC2225 is an F-frame Complete Circuit Breaker. This device comes from C series of Molded Case Circuit Breakers developed by Eaton Corporation for protection of electric circuits from overcurrents and short-circuits. This module is best suited to most general-purpose applications. For ground faults and short-circuits, this device acts instantaneously, while it will allow momentary current surges that may occur on motor starting and transformer inrush by providing delay time. You can integrate the FDC2225 into your electrical circuits if the voltage rating is below 600 Volts AC or 250 Volts DC. The Cutler-Hammer FDC2225, like all F-Frame circuit breakers, is a good fit for reverse feed use. It is HACR rated. The current rating of this Thermal-Magnetic Circuit Breaker is 225 Amps.
It has a fixed tripping value. The frequency rating of the module is 50 to 60 Hertz. The product is UL listed. Its weight is 2 pounds (0.91 kilograms). It is enclosed in a plastic housing and closed with 4 screws to protect the operator from contacting the internal mechanism. The FDC2225 is shipped with terminals installed on the load end only. On the lower part of the module, users will find the “push-to-trip” button. This button is used to check the tripping function. Users will push it periodically to exercise the operating mechanism and to be sure that the device is still operating in a manner that provides adequate protection to electrical circuits. Before taking any action on device cleaning or maintenance, make sure the circuit breaker is switched off.
| Part Number/Catalog No. | FDC2225 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 2 |
| Trip Amps | 200 kA at 240 Volts |
| Interrupting Capacity | 3 pounds |
| Weight | Thermal-Magnetic |
| Trip Unit | 2.75 x 6 x 3.38 inches |
| Part Number/Catalog No. | FDC2225 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 2 |
| Trip Amps | 200 kA at 240 Volts |
| Interrupting Capacity | 3 pounds |
| Weight | Thermal-Magnetic |
| Trip Unit | 2.75 x 6 x 3.38 inches |