Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The FDC2050 is a thermal magnetic circuit breaker, it has non-interchangeable trips, and it belongs to Series C of the molded case circuit breakers manufactured by Cutler-Hammer. The Cutler-Hammer FDC2050 thermal magnetic circuit breaker with non-interchangeable trips operates at a maximum voltage of 600 Volts AC or 250 Volts DC. It has 2 poles and it has a maximum continuous ampere rating of 50 Amps at a specific temperature of 40 degrees Celsius. This temperature has been established at the moment of calibration. If a different temperature is required, the breaker should be derated or a new calibration process must be performed. This circuit breaker is HACR rated and it meets the requirements of the Federal Specifications.
The main function of the Cutler-Hammer FDC2050 thermal magnetic circuit breaker with non-interchangeable trips is to protect systems against abnormal circuit lines, closing separable contacts, and impeding further damage to the whole system or equipment. Thermal magnetic breakers like the Cutler-Hammer FDC2050 thermal magnetic circuit breaker are considered an industry standard since it is a general purpose device that is suitable for most applications that require its features. Once a circuit breaker has tripped, it is important to determine the cause of the trip and then put the breaker back into service. Trip causes can be either a long delay, a short delay, or an instantaneous or ground fault. The internal parts of the Cutler-Hammer FDC2050 thermal magnetic circuit breaker and non-interchangeable trips are an alarm, an auxiliary switch, an under-voltage release mechanism, and a low-energy shunt trip.
| Part Number/Catalog No. | FDC2050 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 2 |
| Trip Amps | 200 kA at 240 Volts AC |
| Interrupting Capacity | 3 pounds |
| Weight | Thermal-Magnetic |
| Trip Unit | 2.75 x 6 x 3.38 inches |
| Part Number/Catalog No. | FDC2050 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 2 |
| Trip Amps | 200 kA at 240 Volts AC |
| Interrupting Capacity | 3 pounds |
| Weight | Thermal-Magnetic |
| Trip Unit | 2.75 x 6 x 3.38 inches |