Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The FDC2030 is a current limiting circuit breaker from Westinghouse/Eaton. The breaker has 2 poles and its trip unit trips when the current exceeds 30 Amps. The FDC2030 has an F frame type and it accommodates terminals on the load side only. The FDC2030, as with all other Eaton circuit breakers with an F frame type, is HACR rated. Being a 2-pole circuit breaker, the FDC2030 has a width of 2.75 inches a height of 6.0 inches and a depth of 3.38 inches. The Cutler-Hammer FDC2030 molded case circuit breaker is purposely designed and manufactured to offer protection to industrial systems that use low voltage. To protect the circuit breaker against fungus, the case is molded from a mix of glass and polyester which also keeps moisture away.
For parts in the FDC2030 that are not factory-protected against moisture, special treatment must be provided if the circuit breaker is to be used in environments that are susceptible to the build-up of moisture and fungus. The FDC2030 employs the use of a thermal magnetic mechanism in its trip unit. The interrupting capacity for the FDC2030 stands at 200,000 Amps at a voltage range of between 220 and 240 Volts AC and 22,000 Amps at 250 Volts DC while at 480 Volts AC, the FDC2030 has an interrupt capacity of 100,000 Amps. Note that these interrupt ratings apply both for the UL 489 and the IEC 157-1 standards. For the FDC2030 to operate as required, like with other circuit breakers from Eaton, a temperature at or below 40 degrees Celsius must be maintained around its operating environment.
| Part Number/Catalog No. | FDC2030 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 2 |
| Trip Amps | 200 kA at 240 Volts |
| Interrupting Capacity | 3 pounds |
| Weight | Thermal-Magnetic |
| Trip Unit | 2.75 x 6 x 3.38 inches |
| Part Number/Catalog No. | FDC2030 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 2 |
| Trip Amps | 200 kA at 240 Volts |
| Interrupting Capacity | 3 pounds |
| Weight | Thermal-Magnetic |
| Trip Unit | 2.75 x 6 x 3.38 inches |