Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Eaton FDB4110 is a thermal magnetic circuit breaker. The breaker has a non-replaceable trip unit and it has 4 poles. The FDB4110 belongs to the Series C group of circuit breakers with an F frame size and a molded case. The breaker’s terminals are only present on the load side. For the capacity, the FDB4110 has an interrupting capacity of 18 kAIC at a voltage of 240 Volts AC under the Underwriters Laboratory (UL) 489 standards. Additionally, under these standards, the FDB4110 has 10 kAIC at 250 Volts DC, but no interrupting capacity rating at 125 Volts DC.
Also, under the IEC 157-1 interrupting capacity ratings, the FDB4110 has 10 kAIC at 250 Volts DC but no capacity ratings at 125 Volts DC. The Eaton FDB4110 has a maximum continuous current rating of 110 Amps tested at a maximum temperature of 40 degrees Celsius. In standard applications, the circuit breaker is designed to accommodate an operating frequency (with an alternating current) of between 50 and 60 Hertz. The FDB4110, as with other circuit breakers with an F frame, can be used in reverse feed applications. The circuit breaker is factory-assembled with the intention of providing years of circuit protection with minimal maintenance. However, when carrying out the few necessary maintenance procedures, e.g. cleaning the terminal and the casing, also check the device for things like extreme discoloration of the molded case or the signs of melting on the terminals. Melting indicates overheating and it can be caused by loose terminals or excessive ambient temperature.
| Part Number/Catalog No. | FDB4110 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 4 |
| Interrupting Capacity | 14 kAIC at 480 Volts AC |
| Weight | 6 pounds |
| Trip Unit | Thermal-Magnetic |
| Dimensions | 5.5 x 6 x 3.38 inches |
| Part Number/Catalog No. | FDB4110 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 4 |
| Interrupting Capacity | 14 kAIC at 480 Volts AC |
| Weight | 6 pounds |
| Trip Unit | Thermal-Magnetic |
| Dimensions | 5.5 x 6 x 3.38 inches |