Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The FDB3100 is an Eaton Cutler-Hammer molded case circuit breaker classified under the C Series of circuit breakers. This module has a maximum voltage of 600 Volts AC and 250 Volts DC. It comes with shipping dimensions of 4.9 inches x 5 inches x 7.5 inches. The net weight for this module is 4 pounds which is also the same as the estimated gross weight. All the C Series circuit breakers support applications with current ratings of up to 2500 Amps and this outperforms the calculations listed in the IEEE guidelines. The circuit breaker has 3-phase power with 3 poles and it has a voltage rating of 600 Volts with a current of 100 Amps. The module features the bolt-on connection type and it comes with thermal magnetic protection type. The FDB3100 is an LI-Long-Time instantaneous circuit breaker with a kAIC rating of 14 kAIC at 600 Volts AC, 10 kAIC at 250 Volts DC, and 18 kAIC at 240 Volts AC. The FDB3100 is an F Frame type of circuit breaker and it comes with load terminal lugs only.
The FDB3100 is available for the 600 Volts AC and 250 Volts DC applications. The FDB3100 is an F Frame circuit breaker .and it is HACR rated and suitable for HID (High-Intensity Discharge) uses and also for the reverse feed use. The FDB3100 has been equipped with electronic sensing and a tripping mechanism, making the inverse delay release independent of the ambient temperature. Thermal memory is incorporated to ensure that the power operation is not performed immediately after an overload trip. Despite the fact that the FDB3100 provides years of maintenance-free operation, the breakers should be inspected periodically. When installing the FDB3100, it is recommended that all warnings and cautions should be adhered to. Therefore, the user manual is an important booklet for the installers.
Part Number/Catalog No. | FDB3100 |
Product Type | Molded Case Circuit Breaker |
Series | C |
Frame | F |
Pole(s) | 3 |
Trip Amps | 14 kA @ 480V |
Interrupting Capacity | 4.5 lb |
Weight | Thermal-Magnetic |
Trip Unit | 4.13 x 6 x 3.38 in. |
Part Number/Catalog No. | FDB3100 |
Product Type | Molded Case Circuit Breaker |
Series | C |
Frame | F |
Pole(s) | 3 |
Trip Amps | 14 kA @ 480V |
Interrupting Capacity | 4.5 lb |
Weight | Thermal-Magnetic |
Trip Unit | 4.13 x 6 x 3.38 in. |