Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The FD4175 is a thermal magnetic circuit breaker manufactured by Eaton Cutler-Hammer. The Cutler-Hammer FD4175 circuit breaker is part of Series C of the Eaton Molded Case Circuit Breakers. The Cutler-Hammer FD4175 circuit breaker features 4 poles, 175 trip Amps, and 35 kAIC of interrupting capacity at 277 Volts, and it is contained in an F-Frame. The Cutler-Hammer FD4175 circuit breaker is equipped with a terminal shield used in line terminal locations and it can also be installed with special terminal shields when a solenoid operator is mounted on the Cutler-Hammer FD4175 circuit breaker. The Cutler-Hammer FD4175 circuit breaker is configured with an endcap kit that is used to connect the bus bar, hardware, or to make similar electrical connections. The Cutler-Hammer FD4175 circuit breaker is suitable for reverse feed applications.
The Cutler-Hammer FD4175 circuit breaker uses copper or aluminum terminals as the standard configuration and it uses copper-only terminals as an optional configuration. The Cutler-Hammer FD4175 circuit breaker is entirely self-contained since the current sensor, relay, and power supply are found inside the module. Time delays are designed to be selectable by the users from instantaneous -1 seconds for 0.10-Amps current settings or higher. The Cutler-Hammer FD4175 circuit breaker is equipped with 2 alarm contacts, a 50% pre-trip setting, and a 100% after-trip setting which are based only on earth leakage current levels. The alarm switches operate when the Cutler-Hammer FD4175 circuit breaker is tripped by a short circuit or overcurrent.
| Part Number/Catalog No. | FD4175 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 4 |
| Trip Amps | 35 kA at 277 Volts |
| Interrupting Capacity | 6 pounds |
| Weight | Thermal-Magnetic |
| Trip Unit | 5.5 x 6 x 3.38 inches |
| Part Number/Catalog No. | FD4175 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 4 |
| Trip Amps | 35 kA at 277 Volts |
| Interrupting Capacity | 6 pounds |
| Weight | Thermal-Magnetic |
| Trip Unit | 5.5 x 6 x 3.38 inches |