Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The FD4030 is a complete Series C circuit breaker from an Eaton Corporation. The FD4030 is an F-Frame FD type circuit breaker. FD circuit breakers can support 15 to 225 Amps applications. F-Frame circuit breakers from Eaton Corporation are HACR rated and also suitable for reverse feed applications. The FD4030 is suitable for HID applications. The current rating for the FD4030 is 30 Amps and the voltage ratings are 600 Volts AC and 250 Volts DC. The frequencies that are supported are 50 to 60 Hertz and the FD4030 is rated at 65 kilo-amps with an interrupting capacity of 240 Volts AC, a 35 kiloamp interrupting capacity at 480 Volts AC, and 18 kiloamps interrupting capacity at 600 Volts AC. It is rated for a 10-kiloamp interrupting capacity of 250 Volts DC. The FD4030 uses a fixed thermal, fixed magnetic trip unit. It is a 4-pole circuit breaker. It also includes load side terminals which are made of steel. Recommended wire for termination is copper or aluminum with #14 to #1/0 AWG.
The FD4030 should only be installed by trained personnel and circuit breaker specifications should be compared to requirements to ensure suitability for installation. Furthermore, to prevent injury and equipment damage during installation the circuit breaker should be in the off state, the associated electrical equipment should be de-energized and the working area should be clear of voltages. Generally accepted safety procedures should also be followed. The FD4030 is an F-frame circuit breaker with dimensions of 6 x 5.5 x 3.38 inches. The weight of the circuit breaker is around 6 pounds.
Part Number/Catalog No. | FD4030 |
Product Type | Molded Case Circuit Breaker |
Series | C |
Frame | F |
Pole(s) | 4 |
Trip Amps | 35 kA @ 277V |
Interrupting Capacity | 6 lb |
Weight | Thermal-Magnetic |
Trip Unit | 5.5 x 6 x 3.38 in. |
Part Number/Catalog No. | FD4030 |
Product Type | Molded Case Circuit Breaker |
Series | C |
Frame | F |
Pole(s) | 4 |
Trip Amps | 35 kA @ 277V |
Interrupting Capacity | 6 lb |
Weight | Thermal-Magnetic |
Trip Unit | 5.5 x 6 x 3.38 in. |