Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Eaton (Cutler-Hammer) FD3200 is an industrial circuit breaker. In industrial surroundings, this device has a function to provide protection to both the equipment and the equipment operator. The device will do this in the event of a circuit overload. In this situation, the FD3200 “trips” and opens its contacts so there is no current in the electrical circuits behind this MCCB. This unit is 200 Amps rated and users can supply up to 600 Volts AC or 250 Volts DC voltages at its input side. The FD3200 offers circuit protection for a wide range of products and applications. It is usually applied to electrical mains, branches, and industrial production equipment. Like all F-frame MCCBs, the FD3200 is also suitable for reverse feed use. In the case of a trip fault, the operator has to move the handle on the front of the device to reset the circuit pathway. The handle must be moved to the “off” position and then to the “on” position to apply power behind the MCCB.
The FD3200 is shipped with an approximate weight of 4.5 pounds (2.0 kilograms). The size of this F-frame module is impressive because the device can handle up to 200 Amps of current, but the dimensions are only 4.13 x 6.00 x 3.38 inches (104.3 x 152.4 x 85.7 millimeters). For installation purposes, this module requires a DIN rail that it can be mounted on. When users position the MCCB in the electrical cabinet, the next step of installation is to connect the wires on the input side and the output side. Then the users can apply power and move the handle on the front side of the device to “on” position. After this, the FD3200 is fully functional.
| Part Number/Catalog No. | FD3200 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 3 |
| Trip Amps | 35 kA @ 277V |
| Interrupting Capacity | 4.5 lb |
| Weight | Thermal-Magnetic |
| Trip Unit | 4.13 x 6 x 3.38 in. |
| Part Number/Catalog No. | FD3200 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 3 |
| Trip Amps | 35 kA @ 277V |
| Interrupting Capacity | 4.5 lb |
| Weight | Thermal-Magnetic |
| Trip Unit | 4.13 x 6 x 3.38 in. |