Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Cutler-Hammer FD1010 is a Series C one-pole complete molded case circuit breaker. This is a Type FD thermal-magnetic circuit breaker with a non-interchangeable trip unit. It has a fixed thermal and a fixed magnetic trip. The current rating of this MCCB is 10 Amps. This current should be around 20% greater than the application’s current consumption or this device cannot fully protect the electronic devices it is attached to. The item can be connected to 277 Volts AC voltage or 250 Volts DC voltage. The interrupting capacity of the FD1010 depends on the voltage being used. The interrupting capacity is 35 kAIC at 277 Volts AC and 10 kAIC at 250 Volts DC. The Eaton FD1010 is usually a part of commercial and industrial panelboards, motor control centers, and switchboards.
The FD1010 has a handle in the middle of the front panel that indicates the status of the contacts. If the handle is in the “on” position, then the current is transferred from the input to the output of the MCCB. When there is a trip situation, this handle automatically goes to the “trip” position and the current flow to the output is discontinued. Users must reset this device manually or install an automated device on it as an option. The FD1010 MCCB has a length of 3.38 inches (86 millimeters), a height of 6.00 inches (152 millimeters), and a width of 1.38 inches (35 millimeters). The FD1010 thermal magnetic circuit breaker has been tested and listed by UL. It has F frame housing with a high dielectric strength to house the tripping mechanism and terminals. In case of an overcurrent or short-circuit, this device provides automatic and instantaneous circuit breaking. The item weighs 2.0 pounds (0.9 kilograms).
| Part Number/Catalog No. | FD1010 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 1 |
| Trip Amps | 35 kA @ 277V |
| Interrupting Capacity | 2 lb |
| Weight | Thermal-Magnetic |
| Trip Unit | 1.38 x 6 x 3.38 in. |
| Part Number/Catalog No. | FD1010 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 1 |
| Trip Amps | 35 kA @ 277V |
| Interrupting Capacity | 2 lb |
| Weight | Thermal-Magnetic |
| Trip Unit | 1.38 x 6 x 3.38 in. |