Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The EHD2070 is Eaton’s Series C Type EHD Thermal-Magnetic Circuit Breaker with a non-interchangeable trip unit. This molded case circuit breaker has a 70 Amps current rating at 40 degrees Celsius. This is a 2-pole module that comes in an F-frame enclosure. It is equipped with a standard pressure load terminal. Its voltage rating is 480 Volts AC (at 50 to 60 Hertz) or 250 Volts DC. The device is rated by voltage and users should check if this parameter fits the installation rating. This MCCB is suited for reverse feed applications. It will efficiently protect electrical installations from overcurrents and short-circuits. The continuous current rating for the Cutler-Hammer EHD2070 is 70 Amps and it is the amount of current that this MCCB can carry in the open air. This value is decreased if the operating temperature value rises.
The interrupting rating for this thermal-magnetic circuit breaker is 14 kAIC at 480 Volts AC. On the front side of this 2-pole MCCB, users can find the pushbutton to activate the push-to-trip mechanism. This mechanism is designed for test purposes of the trip function. The EHD2070 circuit breaker measures 3.38 inches by 2.75 inches by 6.00 inches (86 millimeters x 70 millimeters x 152 millimeters). It has an HACR rating and it is applicable for high-intensity discharge (HID) use. The Eaton EHD2070 is distinguished with high performance. It is one of the most reliable devices of this type on the market that can perform thousands of trips without any deterioration. The installation procedure is simple because users only need to attach the device to a DIN rail.
| Part Number/Catalog No. | EHD2070 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 2 |
| Trip Amps | 18 kA at 240 Volts AC |
| Interrupting Capacity | 3 pounds |
| Weight | Thermal-Magnetic |
| Trip Unit | 2.75 x 6 x 3.38 inches |
| Part Number/Catalog No. | EHD2070 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 2 |
| Trip Amps | 18 kA at 240 Volts AC |
| Interrupting Capacity | 3 pounds |
| Weight | Thermal-Magnetic |
| Trip Unit | 2.75 x 6 x 3.38 inches |