Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The EHD2050 is an Eaton Cutler-Hammer Series C complete molded case circuit breaker (MCCB) with a 50 Amps current rating. The continuous current rating of the EHD2050 is the amount of current that this MCCB can carry in the open air. This value is linked to the operating temperature value. For ambient temperatures of over 40 degrees, this current rating is slightly reduced. This thermal-magnetic circuit breaker is suitable for High Intensity Discharge (HID). The interrupting rating for this MCCB is 18 kAIC at 240 Volts AC and 14 kAIC at 480 Volts AC. The interrupt rating of the circuit breaker always decreases when the voltage increases. Users should pay attention to the interrupt rating because it is the most crucial factor in the breaker selection process.
This value must be synchronized with the users’ applications because it is the amount of fault current that this device can safely interrupt without being damaged. The Eaton Cutler-Hammer EHD2050 2-pole MCCB has a push-to-trip mechanism which allows the users to test the trip mechanism by manual means. The device is packed inside of an F frame housing that has dimensions of 3.38 inches x 2.75 inches x 6.00 inches (86 millimeters x 70 millimeters x 152 millimeters). The EHD2050 has terminals on the load side. It can be connected to a maximum of 480 Volts AC or 250 Volts DC. The MCCB’s trip mechanism is controlled by fixed thermal and fixed magnetic trip controls. These 2 trip types protect the electrical installation from overcurrents and short-circuits.
| Part Number/Catalog No. | EHD2050 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 2 |
| Trip Amps | 18 kA @ 240V |
| Interrupting Capacity | 3 lb |
| Weight | Thermal-Magnetic |
| Trip Unit | 2.75 x 6 x 3.38 in. |
| Part Number/Catalog No. | EHD2050 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 2 |
| Trip Amps | 18 kA @ 240V |
| Interrupting Capacity | 3 lb |
| Weight | Thermal-Magnetic |
| Trip Unit | 2.75 x 6 x 3.38 in. |