Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The EHD2010 is a Circuit Breaker from Series C manufactured by Eaton (formerly Cutler-Hammer). The device has a Type F frame and a molded case. The EHD2010 has 2 poles and a 10 Amp maximum continuous current rating at 40 degrees Celsius. It features an arc extinguisher technology that makes it usable for applications with 14 kAIC interruption rating at 480 Volts AC input voltage. This is also the maximum voltage that can be applied to this molded case circuit breaker without damaging the device. The EHD2010 has a thermal-magnetic trip mechanism that is not interchangeable. The Eaton Cutler-Hammer EHD2010 supports numerous accessories that can further extend its capabilities. The most usual ones are auxiliary switches and connectors for multiple wires. For the purpose of device control protection, you can upgrade the EHD2010 with the lockable handle blocker external accessory or with the cylinder lock. This MCCB should be occasionally inspected to ensure that the tripping mechanism is performing as required. You can use the red PUSH-TO-TRIP button for this purpose.
When installing or removing the EHD2010, always deactivate the power source that is supplying the input side of the device; this is to avoid dangerous effects on the breaker and to keep the personnel performing the installation safe. You will need 2.75 x 6.00 x 3.38 inches (70 x 86 x 35 millimeters) of space available to install the EHD2010. Its shipping weight is approximated at 1.36 kilograms (3.0 pounds). This molded case circuit breaker is applied only to distribution systems with 50 to 60 Hertz rating.
| Part Number/Catalog No. | EHD2010 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 2 |
| Trip Amps | 18 kA @ 240V |
| Interrupting Capacity | 3 lb |
| Weight | Thermal-Magnetic |
| Trip Unit | 2.75 x 6 x 3.38 in. |
| Part Number/Catalog No. | EHD2010 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 2 |
| Trip Amps | 18 kA @ 240V |
| Interrupting Capacity | 3 lb |
| Weight | Thermal-Magnetic |
| Trip Unit | 2.75 x 6 x 3.38 in. |